94 Z vert - $2k - granbury TX
94 Z vert - $2k - granbury TX
Posting this for Vance to get it out of his Mom's driveway quickly. I'm in the Florida forum if any Q?'s
1994 Chevy Camaro Teal Green convertible, body good shape, nose cone needs paint (new - unpainted) and top needs replaced. BOSE Cd.
Automatic 132000miles, Tranny needs to be rebuilt, was rebuilt a year ago by a cheap shop. drove it from Georgia home on Xmas leave,
Motor is in good shape. K&N FIPK, OR pipe, Flowmaster muffler in stock pipes,
Has a minor exhaust leak on the passenger side donut gasket.
Asking 2000
Car is located at the following address
400 Daisy Dr
Granbury TX, 76049
please contact Vance via e-mail
vbraziel@vebcentrix.com
the tranny cross member came loose while driving, and the tranny fell down, so i just left it. my dad bolted the tranny back up, and changed the fluid, and now it runs/drives in reverse/1/2/3 , but no overdrive. so i think it would have to be towed.
1994 Chevy Camaro Teal Green convertible, body good shape, nose cone needs paint (new - unpainted) and top needs replaced. BOSE Cd.
Automatic 132000miles, Tranny needs to be rebuilt, was rebuilt a year ago by a cheap shop. drove it from Georgia home on Xmas leave,
Motor is in good shape. K&N FIPK, OR pipe, Flowmaster muffler in stock pipes,
Has a minor exhaust leak on the passenger side donut gasket.
Asking 2000
Car is located at the following address
400 Daisy Dr
Granbury TX, 76049
please contact Vance via e-mail
vbraziel@vebcentrix.com
the tranny cross member came loose while driving, and the tranny fell down, so i just left it. my dad bolted the tranny back up, and changed the fluid, and now it runs/drives in reverse/1/2/3 , but no overdrive. so i think it would have to be towed.
yup. LT1, A4, cloth interior.
stock saladshooter wheels, the rubber was decent last time i seen it.
when I owned about a year ago, I put a new Opti and water pump, plugs and wires on it.
think the guy after me put new rotors & brakes on it.
it needs alot of TLC, but for a guy on a budget who's not afraid to put work into it, it's a deal
stock saladshooter wheels, the rubber was decent last time i seen it.
when I owned about a year ago, I put a new Opti and water pump, plugs and wires on it.
think the guy after me put new rotors & brakes on it.
it needs alot of TLC, but for a guy on a budget who's not afraid to put work into it, it's a deal
$2000 for it.
for $400, we can ship it back on
www.movemycar.com
and he's got it sold for a grand here for parts.
yeah, it's a lot of work, but that's why it's priced right.
we found complete (frame and all, bolt-on affair) convertible tops for under $500 on e-bay from guys who wrecked their cars and were parting them out.
figure a top, a $60 LeBra to cover the nose. and snag a tranny off the website, or have it rebuilt.
you could be good for well under $4k.
for $400, we can ship it back on
www.movemycar.com
and he's got it sold for a grand here for parts.
yeah, it's a lot of work, but that's why it's priced right.
we found complete (frame and all, bolt-on affair) convertible tops for under $500 on e-bay from guys who wrecked their cars and were parting them out.
figure a top, a $60 LeBra to cover the nose. and snag a tranny off the website, or have it rebuilt.
you could be good for well under $4k.
Originally posted by john storie
nah, no pics.
T-wulf has dibs prolly, i've talked to him before, and he's good people.
vance went to see movie TORQUE tonite, he will answer T-wulf later tonite
nah, no pics.
T-wulf has dibs prolly, i've talked to him before, and he's good people.
vance went to see movie TORQUE tonite, he will answer T-wulf later tonite

Sorry to hear he went to see torque though

I'll be up for a while. you or he can hit me on AIM if need be
Thread
Thread Starter
Forum
Replies
Last Post
KYWes
Suspension, Chassis, and Brakes
2
Apr 24, 2015 09:17 AM



