89 GTA parting out and SBC performance parts
03-27-2005, 09:47 PM
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Detroit, MI
Posts: 54
89 GTA parting out and SBC performance parts
Well I’ve decided to go ahead and part the car….below is a bigger list that I’ve gotten together. If there is something you need from this kinda car, but it’s not listed let me know….I probably have it.
The car is an 89 GTA, bright red, tan leather interior, L98, 700R4, 9 bolt 3.27….individual parts list
GTA wheels w/ tires(less than 3k on them…3 used WS6 caps included, new sold separate below)
T-tops (have tan shades)
Fenders (only dime size dent on driver side VERY front)
Doors (no dents, dings, or scratches)
Dash Pad (no cracks or fading)
Gauges (140mph)
Rear seats (perfect….no tears, rips, stretch marks, or stains)
All tan interior pieces…rear, sail panels, door panels, ect. (no scratches or fading...NICE)
Dash pieces (performance suspension piece….no scratches or fading on anything)
Rear Tail lights…center and both sides (no cracks or breaks)
Rear bumper cover (this is the only thing not red…..it’s gunmetal gray)
Rear Bumper support
Driver Rear quarter panel (not from this car….off 89 formula….email for details)
Rear driver GTA quarter panel GFX piece (white)
Front bumper (scratches on driver side corner…have pics….GTA emblem sold separate)
Slotted rotors (all 4….used, but less than 5k….pads used with these rotors will be included)
Holley High flow fuel pump 255
Stock Gas tank (barely even surface rust…..nice condition)
Rear hatch w/ 5% tint (spoiler is the typical cracks and fading)
Fog lights (stock mounting cups with aftermarket lights….BRIGHT)
WS6 Center Caps…..NEW
GTA emblems (both birds, both fender badges, and hood badge)
Serpentine bracket w/ AC compressor, alt, power steering pump, and smog pump (belt for eliminating smog included…belt less than 5k)
Flowmaster muffler and turn down tips
3 inch custom intermediate welded to y-pipe for Headman lt’s (will separate)
Headman longtube headers (less than 5k miles…Y-pipe available for extra ^)
Holley Stealth Ram w/ AFPR (never driven….only installed….never got car running right, but lifter problem not intake)
Custom fuel line setup from tank lines, into filter, stainless flex line from firewall to Stealth Ram fuel rails.
Roller Lifters (rebuilt), pushrods (Brand new), and spyder spring holddown
2 L98 cams (1 w/ 150k 1 w/ 35k)
WS6 springs
Aluminum Driveshaft
700R4 (150k….shifted AWESOME, no slips jumps or leaks)
MSD coil (mounted on stock mounting bracket)
Headlights (will be separating gold letters and selling separate)
AC heater box and all AC components other than Compressor (can’t guarantee condesor…never used AC)
Center console (typical separation, but not bad….has power mirror and window conrols)
Shift ***
Steering wheel (radio controls)
Autometer Dual gauge pod
L98 Heads (2 sets….both passenger are fine….driver side will need checked before use…email for details)
Water pump (less than 5k, aftermarket)
WS6 Steering box
Steering Column
Front end pieces (spindles, A-arms, centerlink?)
Starter (less than 5k, aftermarket)
Oil pan (2 available)
Air Dam/radiator ducting (intact, normal scratches, but in good condition)
Washer bottle
Overflow bottle
TPI Wiring harness
TPI computer
AC/heater controls
T-top frame (will cut top of car off for conversion to Ttop)
Some/most parts are still currently on the car….as they are needed or I feel like they will be coming off the car. If your buying a piece on the car I will let you know and give you a headsup on a timeframe to get it off and shipped.
I’m not listing prices for a reason….I expect a lot of response for a number of these parts so I want to keep my job as easy and honest as possible. The person who offers the most and/or gets me a deposit or whole payment will have priority. As well, with bigger items I will prefer to get them picked up…body panels, heavy items, easily damaged items, ect. Although if a person offers me the right price I will ship….just would need a little time to get prices and such.
Shipping will be done through mainly USPS for things that can be boxed, everything else will be through UPS. On certain items shipping cost will not be easily available.
Any questions can be directed to the email or screen name below….
Thanks
Ryan
Aj4122@wayne.edu
FastTA2001
Pics available soon….
The car is an 89 GTA, bright red, tan leather interior, L98, 700R4, 9 bolt 3.27….individual parts list
GTA wheels w/ tires(less than 3k on them…3 used WS6 caps included, new sold separate below)
T-tops (have tan shades)
Fenders (only dime size dent on driver side VERY front)
Doors (no dents, dings, or scratches)
Dash Pad (no cracks or fading)
Gauges (140mph)
Rear seats (perfect….no tears, rips, stretch marks, or stains)
All tan interior pieces…rear, sail panels, door panels, ect. (no scratches or fading...NICE)
Dash pieces (performance suspension piece….no scratches or fading on anything)
Rear Tail lights…center and both sides (no cracks or breaks)
Rear bumper cover (this is the only thing not red…..it’s gunmetal gray)
Rear Bumper support
Driver Rear quarter panel (not from this car….off 89 formula….email for details)
Rear driver GTA quarter panel GFX piece (white)
Front bumper (scratches on driver side corner…have pics….GTA emblem sold separate)
Slotted rotors (all 4….used, but less than 5k….pads used with these rotors will be included)
Holley High flow fuel pump 255
Stock Gas tank (barely even surface rust…..nice condition)
Rear hatch w/ 5% tint (spoiler is the typical cracks and fading)
Fog lights (stock mounting cups with aftermarket lights….BRIGHT)
WS6 Center Caps…..NEW
GTA emblems (both birds, both fender badges, and hood badge)
Serpentine bracket w/ AC compressor, alt, power steering pump, and smog pump (belt for eliminating smog included…belt less than 5k)
Flowmaster muffler and turn down tips
3 inch custom intermediate welded to y-pipe for Headman lt’s (will separate)
Headman longtube headers (less than 5k miles…Y-pipe available for extra ^)
Holley Stealth Ram w/ AFPR (never driven….only installed….never got car running right, but lifter problem not intake)
Custom fuel line setup from tank lines, into filter, stainless flex line from firewall to Stealth Ram fuel rails.
Roller Lifters (rebuilt), pushrods (Brand new), and spyder spring holddown
2 L98 cams (1 w/ 150k 1 w/ 35k)
WS6 springs
Aluminum Driveshaft
700R4 (150k….shifted AWESOME, no slips jumps or leaks)
MSD coil (mounted on stock mounting bracket)
Headlights (will be separating gold letters and selling separate)
AC heater box and all AC components other than Compressor (can’t guarantee condesor…never used AC)
Center console (typical separation, but not bad….has power mirror and window conrols)
Shift ***
Steering wheel (radio controls)
Autometer Dual gauge pod
L98 Heads (2 sets….both passenger are fine….driver side will need checked before use…email for details)
Water pump (less than 5k, aftermarket)
WS6 Steering box
Steering Column
Front end pieces (spindles, A-arms, centerlink?)
Starter (less than 5k, aftermarket)
Oil pan (2 available)
Air Dam/radiator ducting (intact, normal scratches, but in good condition)
Washer bottle
Overflow bottle
TPI Wiring harness
TPI computer
AC/heater controls
T-top frame (will cut top of car off for conversion to Ttop)
Some/most parts are still currently on the car….as they are needed or I feel like they will be coming off the car. If your buying a piece on the car I will let you know and give you a headsup on a timeframe to get it off and shipped.
I’m not listing prices for a reason….I expect a lot of response for a number of these parts so I want to keep my job as easy and honest as possible. The person who offers the most and/or gets me a deposit or whole payment will have priority. As well, with bigger items I will prefer to get them picked up…body panels, heavy items, easily damaged items, ect. Although if a person offers me the right price I will ship….just would need a little time to get prices and such.
Shipping will be done through mainly USPS for things that can be boxed, everything else will be through UPS. On certain items shipping cost will not be easily available.
Any questions can be directed to the email or screen name below….
Thanks
Ryan
Aj4122@wayne.edu
FastTA2001
Pics available soon….
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM
Doug Harden
Automotive News / Industry / Future Vehicle Discussion
29
07-30-2003 07:05 AM
z28projects4ever
Automotive News / Industry / Future Vehicle Discussion
9
07-16-2002 07:48 PM