Here we go..lets get some stuff out of the way....I am parting the car out simply because my priorities in life have changed. I have enjoyed the car for many years, but right now i need to take advantage of some of opportunities given to me so i need to liquidate some of the cash i have put in the car over the years. I will not be accepting any partial trades. All prices are pretty much non negotiable, unless you are purchasing couple of items, then we can work out a better deal. All prices are + shipping. PLEASE DO NOT i repeat DO NOT PM me, as i will not get back to you. All questions should be EMAILED to MARCINWZ@GMAIL.COM Please do not waste my time by asking for pictures of items if you have no intentions of buying the parts. Please realize that i will be flooded with questions so i might not get back to you as fast as you would like, all EMAILs will be returned though. I will take few videos of the car tomorrow, driving, accelerating, start up etc, so everyone can see the car and the parts are 100% working. Car makes no weird noises, does not leak or burn any oil, and is a joy to drive. If someone wants to make me an offer on the whole car please dont hesitate. Anyhow, that should over most of it...here is the list, which by no means is complete, i will NOT be selling the UltraZ hood or the SS spoiler, or any interior parts.
Car made 700rwhp before a smaller pully/bigger intake pipe/true duals etc...all on 93 pump gas.

HERE WE GO:

Edelbrock Intake LT4 (RED)
AFR 227 LT4 HEADS Ported by Lloyed (springs good up to 650 lift)
Jassel Comp Shaft mounted Rockers 1.6
Heads flow
.2 138/103
.3 206/139
.4 255/173
.5 293/198
.6 308/210
.7 313/229
.8 314/237

Do not want to sell it sepertatly as it is all ment to work together, it is top of the line stuff.
$3750
Nothing wrong with any of it...less then 5k on all of it.

Custom Cam by Pro Line Racing (forced induction cam)
Duration @ .050" 236/242
Lift .572/.576 (1.65/1.6)
Lobe Sep. 115
Advance +4
$250

Morel Hyrdolic Lifters with end bars
$300

ATI ProCharger D1 Custom Kit 12 rib
ATI D1 Supercharger (5k or so since been serviced)
Custom Intercooler
SDCE Tensioner
3 pullys 3.4, 3.7, and 4.25
HARD 4inch custom Inlet pipe for the blower
gigantic filter, all hoses/pipes connected with T-bolt Clamps
ATI RACE BYPASS VALVE
ATI FLUID DAMPER
$4000 for a complete kit





Alkycontrol Methanol Kit

comes with everything as you would get it from AlkyCOntrol
$500

Moser 12 bolt Rear End
3.73 Gear
HD Posi
3 channel ABS
1350 Yoke
Heavy Duty Cover
$1900

Lingenfelter driveshaft 3.5inches
aluminum, shortned, balanced, 1350 end for the 12 bolt
$250

T56 Transmission
stock, works 100% perfectly, less then 100k, does NOT pop out of reverse, never ran with slicks, smooth shifts etc etc.
$1200

Pro 5.0 Shifter + 03 Cobra ****
custom short stick with a 03 Cobra ****
$200

Mcleod Street Twin clutch with Aluminum Flywheel
Less then 1k since a rebuilt! comes with the adjustable master cylinder.
$950

Mcleod Street Twin clutch with Aluminum Flywheel
will need to be rebuilt soon, i did NOT slip with over 700rwhp so it has some life left
$500

BMR Adjustable Torque Arm
Black
$175

Hooker LongTube 1 3/4 headers (uncoated but not rusty)
the flange has been cut off so they are slip on (will include the old flange if needed)
$300

3inch True Dual Mandrel Bent exhaust
xpipe, 3 inch Magnaflow mufflers with nice turndowns
$500

Fully Forged Top of the line SHORTBLOCK to handle all the boost
put toghter by Pro Line Racing
3.75 Callies Dragon Slayer Crank
6.0 Oliver Forged Rods
Custom Blower -31cc Diamond Pistons
Hellfire Rings
(callies) 4 bolt mains
Canton Oil pan
coated clevite bearings throughout
less then 5k...does not burn any oil
3800

Fikse FM5 Wheels
Polished 17x9.5 front with some Kumohs
17x11 Rear with nittos drag radials
they are not perfect, had some curbrash that i have fixed, you can hardly see it.
$2500

RaceTronix Dual Intank Walbro KIT
Complete kit and wiring harness, hobbs switch etc etc
$450

Holly 96lb low impedance Injetors
Like new less then 3k
$400

VersaFueler Impedance Covertere Box
$250 for additional 100 i can include a M6 OBD I engine/tranny harness so you dont have to splice anything in.

Valve Covers
Pro Form PRO-141-130
$75

CSI Electric Water Pump for LT1
$100

ASM 58mm Throtle Body
$375

Vented Opti AD DELCO
Less then 5k
$250 + 35 for a pretty much new harness

ARP HEAD STUDS 12 point
ARP 234-4301
$80

 

 

Is the t-56 completly stock?

 

yes sir...all original, never opened, 100% perfect!

 

Will the torque arm work on a stock rear?

 

Marcin, I'll take the Walbro DP setup. Shoot me an email with payment info. I will need it shipped to MA (probably 02767).

jrbellas95z28@yahoo.com

Jon

 

Dayumn Marcin...you are killing me. Is that Alky new never used? Your VC's ever leak out the back? I've got the exact same ones and they leak at the rear. I was told they need to be milled as they don't really fit but I can't find the measurements no more.

I need the Alky. jks93lt@team.camaroz28.com

 

would you be interest in a parcel trade for your race bypass for my new ati bypass plus cash?

 

bump for a badass guy/car. I'm really sad to see this car being pulled apart.

 

Still waiting to hear on the dual walbros marcin. Ready to buy $$.

 

I need the passengers side mirror,if you will part with it? Price? TIA.

 

I'll take the valve covers, sent ya an e-mail also.

Mike

 

I apologize for not posting to buy anything(though I REALLY wish I could) but I just have to say that your car was probably my favorite 4th gen. Well done with it!

 

thanks!


sorry guys...i think i got back to everyone...i am going out of town this weekend, so i am going to take most stuff off next weekend...stay tuned..nothing is sold yet, but i have a good idea who wants what

 

Marcin, what is the status?

Jon