55lb delpi injectors
Thread Starter
Registered User
Joined: Mar 2005
Posts: 327
From: Tulsa OK
55lb delpi injectors
Static Flow Rate @ 43.5 PSI (300KPa) = 55.0 lb/hr / 6.9 gm/sec / 578 cc/min
Static Flow Rate @ 58.0 PSI (400KPa) = 63.5 lb/hr / 7.97 gm/sec / 667 cc/min
Dynamic Flow Rate @ 43.5 PSI = 1.34 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 2 Ohms / Low Impedance / Low-Z (Peak-hold ECM driver modifications required)
Cone Spray Angle - 20.3 degrees - single spray cone. Approximate cone angle for 90% of spray volume
Looking for $200 or a possible trade on some 42s
Static Flow Rate @ 58.0 PSI (400KPa) = 63.5 lb/hr / 7.97 gm/sec / 667 cc/min
Dynamic Flow Rate @ 43.5 PSI = 1.34 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 2 Ohms / Low Impedance / Low-Z (Peak-hold ECM driver modifications required)
Cone Spray Angle - 20.3 degrees - single spray cone. Approximate cone angle for 90% of spray volume
Looking for $200 or a possible trade on some 42s
Thread
Thread Starter
Forum
Replies
Last Post
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM