I am reposting this to clear up some confusion. I currently DO NOT have a crank for this kit. I am including a brand new crank that will be ordered to the purchasers specs. The reason the old crank is not included is because I do not trust a mallory weight that was installed in the balancing. A pic can be seen here.

The price of $850 is for an Eagle cast crank with a 3.75" stroke. A forged piece can be substituted for an EXTRA $400 (total of $1250). The eagle cranks will not hold up shipping, both cranks are in stock at a friends shop,so no fear on waiting is necessary.
I will also sell without a crank for 650 shipped.
That being said, here is the original post:

Pics of pistons/rods/rings here.
I have a set (8) of Wiseco pistons and 6" protech billet steel i beam rods. Complete with speedpro rings and ARP bolts.

Were used for less than 1000 miles, nothing wrong with them

These are SBC/LT1 parts, not LS1


Wiseco pro tru forged pistons
#5009H3
Bore size: 4.030
Stroke:3.750
Rod length:6.0
Comp Hgt:1.125
Dome volume:-20cc
Comp ratio w/67cc head 9.2:1


Brand new Eagle cast crank (can be replaced with a forged piece for an additional $400 )

$850 shipped with the cast crank, 1250 with the forged.

 

Back TTT