383 Shortblock(SRP,H-beam,SCAT9000,Clevite)30 min of run time
Thread Starter
Registered User
Joined: Aug 1999
Posts: 1,326
From: DFW TX
383 Shortblock(SRP,H-beam,SCAT9000,Clevite)30 min of run time
I have a 383 shortblock made to handle 700HP that has the following
16cc forged SRP pistons with sealed-power moly rings
4340 H-beam rods 5.7 inch
Scat 9000 cast steel crank (3.75)
Clevite H race bearings
Clevite cam bearings
Melling M155 oil pump with 3/4 inch pickup welded on
Block has been decked .010
Bored and honed with deck plates
Balanced for stock flywheel
Compression with 55cc heads and a .026 gasket is 10.8
I put this motor together and had some AFR heads on it but I came across a real good deal on a higher compression 385 setup so I'm selling this. I had the motor running but never drove the car out of the garage and only ran it for about 30 minutes. Then I bought a motor, lol. Everything is practically new and in great shape. There is over $600 dollars in machine work alone. Cost me over $2200 to build.
$1650 Or Best Offer Plus shipping
16cc forged SRP pistons with sealed-power moly rings
4340 H-beam rods 5.7 inch
Scat 9000 cast steel crank (3.75)
Clevite H race bearings
Clevite cam bearings
Melling M155 oil pump with 3/4 inch pickup welded on
Block has been decked .010
Bored and honed with deck plates
Balanced for stock flywheel
Compression with 55cc heads and a .026 gasket is 10.8
I put this motor together and had some AFR heads on it but I came across a real good deal on a higher compression 385 setup so I'm selling this. I had the motor running but never drove the car out of the garage and only ran it for about 30 minutes. Then I bought a motor, lol. Everything is practically new and in great shape. There is over $600 dollars in machine work alone. Cost me over $2200 to build.
$1650 Or Best Offer Plus shipping
Last edited by BA383TA; Jan 30, 2008 at 07:26 PM.
Registered User
Joined: Aug 2004
Posts: 334
yeah how about some pics- g17061w@epix.net
Last edited by slowZ; Jan 30, 2008 at 06:13 PM. Reason: forgot email addres
Registered User
Joined: Jul 2007
Posts: 110
im interested in your engine very much email me some pictures at bigbirdowns@hotmail.com and ill get in touch with you about a price
Registered User
Joined: Mar 2007
Posts: 374
From: Jacksonville, FL
location... and pics please to bathurstglen331@yahoo.com
Registered User
Joined: Feb 2003
Posts: 1,661
From: Frisco TEXAS
Hey Bill shoot me some pics mathew.head@pbsg.com Maybe we can work something out and I can come over and pick her up in The Colony.