**Gotta fund another engine build. Upgrade stuff for sale**
Thread Starter
Registered User
Joined: Jul 2001
Posts: 367
From: Kusel, Germany
**Gotta fund another engine build. Upgrade stuff for sale**
I have to get some money to build me another motor. So, I have a few things for sale.
BMR black powdercoated tubular rear lower control arms w/ poly/poly bushings - $70
Ready for the dragstrip! BMR Trak Pak fits 3rd & 4th Gen.82-02 Camaro & Firebird. Relocates the torque arm front mount to prevent transmission tailshaft housing cracks. The shorter torque arm design moves the "instant center" rearward for improved weight transfer on acceleration. It has a rear adjuster to allow on-car pinion angle adjustments up to 6 degrees for dragstrip tuning and a polyurethane front mount. This is new, but it has been mounted. However, the crossbrace is brand new and has not been mounted. They both have a few scratches from being moved around the garage, but they are ready to perform. Original cost was $420 - save a ton..- $325
Brand new LT1 Optispark conversion harness. This harness plugs into the optispark on one end and into the wiring harness on the other. It works w/ 95-97 LT1 engines or 93-94 LT1's to convert the failure prone non-vented opti to a vented style. It is a direct plug-in requiring no modifications and is a direct replacement for GM part # 12130319 ELECTRICAL HARNESS 95-96 VENTED, RETAILS FOR $124. - $20!
Harlan red LED shift light. This was one of my favorite upgrades and helped me enourmously when racing. You'll know when to shift for sure.
Dimensions: 1" diameter by 3" long
Housing: Flat black painted Polycarbonate tube
Light: 6 RED high brightness LED's
Usable on all ignition systems (distributor, distibutor-less, 2/4/6/8 cylinders)
Adjustable in 100 RPM steps from 500 RPM to 12000 RPM without additional pills or modules
Originally $55 - $35
SOLD! 3" LS1 aluminum drive shaft.- $150 SOLD - TowShen!
SOLD! BMR silver powdercoated on-car adjustable tubular panhard rod w/ poly/poly bushings - $75 SOLD - think47!
I think that is it for now.
ALL SHIPPING WILL BE THROUGH USPS DOMESTIC PRIORITY ONLY. The cost can be calculated from zip code 09012.
BMR black powdercoated tubular rear lower control arms w/ poly/poly bushings - $70
Ready for the dragstrip! BMR Trak Pak fits 3rd & 4th Gen.82-02 Camaro & Firebird. Relocates the torque arm front mount to prevent transmission tailshaft housing cracks. The shorter torque arm design moves the "instant center" rearward for improved weight transfer on acceleration. It has a rear adjuster to allow on-car pinion angle adjustments up to 6 degrees for dragstrip tuning and a polyurethane front mount. This is new, but it has been mounted. However, the crossbrace is brand new and has not been mounted. They both have a few scratches from being moved around the garage, but they are ready to perform. Original cost was $420 - save a ton..- $325
Brand new LT1 Optispark conversion harness. This harness plugs into the optispark on one end and into the wiring harness on the other. It works w/ 95-97 LT1 engines or 93-94 LT1's to convert the failure prone non-vented opti to a vented style. It is a direct plug-in requiring no modifications and is a direct replacement for GM part # 12130319 ELECTRICAL HARNESS 95-96 VENTED, RETAILS FOR $124. - $20!
Harlan red LED shift light. This was one of my favorite upgrades and helped me enourmously when racing. You'll know when to shift for sure.
Dimensions: 1" diameter by 3" long
Housing: Flat black painted Polycarbonate tube
Light: 6 RED high brightness LED's
Usable on all ignition systems (distributor, distibutor-less, 2/4/6/8 cylinders)
Adjustable in 100 RPM steps from 500 RPM to 12000 RPM without additional pills or modules
Originally $55 - $35
SOLD! 3" LS1 aluminum drive shaft.- $150 SOLD - TowShen!
SOLD! BMR silver powdercoated on-car adjustable tubular panhard rod w/ poly/poly bushings - $75 SOLD - think47!
I think that is it for now.
ALL SHIPPING WILL BE THROUGH USPS DOMESTIC PRIORITY ONLY. The cost can be calculated from zip code 09012.
Last edited by chevroletfreak; Aug 3, 2008 at 11:24 AM. Reason: sold some stuff
Registered User
Joined: Sep 2007
Posts: 1,356
From: CA, home of the smog nazi
Are the LCA's adjustable? Can I get pics to insane_lt1@yahoo.com? Thanks.
Thread Starter
Registered User
Joined: Jul 2001
Posts: 367
From: Kusel, Germany
No they are not adjustable. Most cars don't need the adjustment.
Unfortunately, I cannot get pics until my wife returns from vacation with the camera. I will get pics up of anything that is left at the end of next week when she returns.
Unfortunately, I cannot get pics until my wife returns from vacation with the camera. I will get pics up of anything that is left at the end of next week when she returns.
Registered User
Joined: Sep 2007
Posts: 1,356
From: CA, home of the smog nazi
Nevermind on the pics. By the way, thanks for letting me know what I need on my car. A simple no would have sufficed.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM