*** Zx12 For Sale Cheap!!!! ****
Thread Starter
Registered User
Joined: Apr 2001
Posts: 28
From: Dallas, Tx
*** Zx12 For Sale Cheap!!!! ****
*** Kawasaki ZX12 FORSALE ***
2000 Zx12 Stock Motor
Motor:
Brock/Hindle steptubed exhaust system
Muzzy blockoff plates
Ported stacks
Muzzy clutch hub
2.0 steels
** Mtc Multistage Lockup clutch **
custom light springs for short wheelbase
Computer:
Powercommander, custom mapped on Dyno with wideband
173rwhp/94ftpd of torque (On new Dj250i)
Suspension:
Frank Adams (0-6) arm
Custom 3 hole lowering links
Shinko steath tire
Muzzy highpressure Airshifter setup
17/48 gearing
Also have a 16 tooth front and a 46 rear spare.
Body:
Polished mirror blockoff plates
Custom paint...Viper Steel Grey!
Custom undertail, totally smoothed..no licenese plate
Trimmed lower fairings for ground clearance.
The bike has run 6.1 @ 118.5 with a me on it, 230 pounds...in 70 degree weather. That was with a 1.58 60', no tuning, or ported stacks. I have just now gotten the multistage setup really good, and it runs a 1.56 60' on a wheelie pass, running the same 6.1 @ 118 in 100 degree weather! Bike is low miles, and not ridden on the street...the dallas/arlington area just has too many careless drivers! I have all the stock components that i have taken off, such as mirrors and luggage bolts. I service the bike like clockwork, and its in perfect shape. With a lightweight rider, this bike could be really fast for a stock motor. If anyone is intrested or has any questions, let me know. I have pics avalible on request.
REDCUDED PRICE $6900
Also would be intrested in a trade for a Hayabusa, plus some cash.
1fast93z@mindspring.com
Chris
2000 Zx12 Stock Motor
Motor:
Brock/Hindle steptubed exhaust system
Muzzy blockoff plates
Ported stacks
Muzzy clutch hub
2.0 steels
** Mtc Multistage Lockup clutch **
custom light springs for short wheelbase
Computer:
Powercommander, custom mapped on Dyno with wideband
173rwhp/94ftpd of torque (On new Dj250i)
Suspension:
Frank Adams (0-6) arm
Custom 3 hole lowering links
Shinko steath tire
Muzzy highpressure Airshifter setup
17/48 gearing
Also have a 16 tooth front and a 46 rear spare.
Body:
Polished mirror blockoff plates
Custom paint...Viper Steel Grey!
Custom undertail, totally smoothed..no licenese plate
Trimmed lower fairings for ground clearance.
The bike has run 6.1 @ 118.5 with a me on it, 230 pounds...in 70 degree weather. That was with a 1.58 60', no tuning, or ported stacks. I have just now gotten the multistage setup really good, and it runs a 1.56 60' on a wheelie pass, running the same 6.1 @ 118 in 100 degree weather! Bike is low miles, and not ridden on the street...the dallas/arlington area just has too many careless drivers! I have all the stock components that i have taken off, such as mirrors and luggage bolts. I service the bike like clockwork, and its in perfect shape. With a lightweight rider, this bike could be really fast for a stock motor. If anyone is intrested or has any questions, let me know. I have pics avalible on request.
REDCUDED PRICE $6900
Also would be intrested in a trade for a Hayabusa, plus some cash.
1fast93z@mindspring.com
Chris
Thread Starter
Registered User
Joined: Apr 2001
Posts: 28
From: Dallas, Tx
This bike DOES smoke most hyabusas 
Most stock or near stock Busas run 6.9's to 6.5's in the 1/8....depending on Skill and rider weight. Don't get my wrong, there are hundreds of Busas out there that scream, this is just a good running Zx12. I weigh 210 now, and I took it out the other night. The track was super slippery, I was spinning though 1st and ran a 6.1 @ 119mph with a slow 1.6 60'! With a good 1.54 or so, it would run easy 6.0s....thats 9.2 to 9.3 @ 150mph in the 1/4 
Chris
Most stock or near stock Busas run 6.9's to 6.5's in the 1/8....depending on Skill and rider weight. Don't get my wrong, there are hundreds of Busas out there that scream, this is just a good running Zx12. I weigh 210 now, and I took it out the other night. The track was super slippery, I was spinning though 1st and ran a 6.1 @ 119mph with a slow 1.6 60'! With a good 1.54 or so, it would run easy 6.0s....thats 9.2 to 9.3 @ 150mph in the 1/4 Chris
Thread
Thread Starter
Forum
Replies
Last Post
SpeedJunkee
Parts For Sale
7
Jun 6, 2015 04:27 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Apr 16, 2015 09:57 AM