OMFG... greatest day of my life
The AirCare Drama has ended... I finally passed! *hallelujah, hallelujah* angels are singing... God has smiled down on me... and all is well with the world

Last night I put my brother's ECU in my car, and before that I replaced the catalytic converter with a 1.5X oversized high-flow unit. I gave the keys to my brother today to take it through since I work 8-5.
I gave him a list of things to do, and here's how it played out:
1) Switched to PW0 ECU
2) Went to gas station after driving a little bit aggressively on the way out (not hard, just a little aggressive)
3) Put about 500mL of Methyl Hydrate in the tank (40L tank)
4) Tuned fuel pressure, with the car not running, by repeatedly priming the pump and resetting the pressure, to ~29psi at the regulator
5) Pulled out the maximum amount of ignition timing - roughly 8 degrees total timing BTDC (before top dead center) at idle
6) Filled up on Chevron 92 octane
7) Revved the car for about a minute to about 4k rpm
8) Put front tires to 46 psi (35psi max pressure
)
9) Revved in line again for about 2 mins
10) Drove in, passed with flying colours (some emissions are even under the average)
That's it! Time to go get my autoplan 12 and PAR-TAY!

Last night I put my brother's ECU in my car, and before that I replaced the catalytic converter with a 1.5X oversized high-flow unit. I gave the keys to my brother today to take it through since I work 8-5.
I gave him a list of things to do, and here's how it played out:
1) Switched to PW0 ECU
2) Went to gas station after driving a little bit aggressively on the way out (not hard, just a little aggressive)
3) Put about 500mL of Methyl Hydrate in the tank (40L tank)
4) Tuned fuel pressure, with the car not running, by repeatedly priming the pump and resetting the pressure, to ~29psi at the regulator
5) Pulled out the maximum amount of ignition timing - roughly 8 degrees total timing BTDC (before top dead center) at idle
6) Filled up on Chevron 92 octane
7) Revved the car for about a minute to about 4k rpm
8) Put front tires to 46 psi (35psi max pressure
)9) Revved in line again for about 2 mins
10) Drove in, passed with flying colours (some emissions are even under the average)
That's it! Time to go get my autoplan 12 and PAR-TAY!
Thread
Thread Starter
Forum
Replies
Last Post
Z28amustangklr
Middle Atlantic
0
Mar 28, 2015 03:08 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Jan 21, 2015 06:10 PM



but I can imagine how happy one can feel after the never ending saga
