447.5hp@5640rpm
and
453tq@3660rpm

at 12.3 psi, im no longer impressed

 

QUOTE]Originally posted by John1975


These are my dyno numbers

447.5hp@5640rpm
and
453tq@3660rpm


[/QUOTE]
I hate you.

 

People are running these motors at 20psi and better, so there is lots of room.

Pressure will go down and power will go up with exhaust :P

All from a low compression 4.6 liter that weighs as much as a 502.

 

Yeah the exhaust is still right pinched down . . . lotsa room to grow

Call Amit John , he wants to go to the track tomorrow .

 

what about you??

 

Im not racing tomorow but Ill hook up with you guys afterwards .

 

Ya nice try there! Quit trying to down play it. Your all aluminum.


The non-sc cobra's/mach 1 are iron

 

This one is iron too
the aluminum blocks are not strong enough, or that is what I have heard.
Manley rates the rods to 800hp and the crank and pistons are forged.

But I am sure the motor weighs as much as a 502

 

still no longer impressed

 

still don't care

 

I'll believe it when I get the magnet out.


And no, you don't weigh anything close to a 502

 

you do or else you wouldnt have replied