Best Place for Alignment
Thread Starter
Registered User
Joined: Sep 1999
Posts: 1,884
From: Surrey, B.C, Canada
Best Place for Alignment
Hello guys just wondering who you would recommend for getting an alignment done? With the addition of the K-member and A-arms the car definately needs some work 
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
west coast alignment and chasis ..
those guys are racers and are the best shop in town ... look up chris . he's the guy who did my chasis work and modified the K member u got and installed it ... it'll bring memories back for him seeing the same suspension setup on ur car
those guys are racers and are the best shop in town ... look up chris . he's the guy who did my chasis work and modified the K member u got and installed it ... it'll bring memories back for him seeing the same suspension setup on ur car
Registered User
Joined: Feb 2003
Posts: 52
From: Burnaby, BC, Canada
NTW by my shop in Burnaby (near 8rinks) will do a computer alignment with printout for $35.
BTW this is my shop rate only,... so if u want to get it done this cheap u have to go through me... then u have to deal with me, god knows thats not fun
I may try to sell u something
lol
jk
BTW this is my shop rate only,... so if u want to get it done this cheap u have to go through me... then u have to deal with me, god knows thats not fun
I may try to sell u something
lol
jk
Last edited by IROCNParts; Jan 16, 2004 at 03:52 AM.
Registered User
Joined: Nov 2001
Posts: 1,751
From: Surrey, BC, Can
Dale's alighment USE to have a great name, but I went there recently and the son now runs the show and my impessions have not been good. I will not be going back.
And of course, if you EVER go to Richmond Frame and Alingment I'll never talk to you again unless they give you $400 to give to me.
And of course, if you EVER go to Richmond Frame and Alingment I'll never talk to you again unless they give you $400 to give to me.
Last edited by 97TA-WS6-Con; Jan 16, 2004 at 03:55 PM.
Registered User
Joined: Sep 2001
Posts: 1,074
From: Richmond B.C. Canada
Originally posted by 97TA-WS6-Con
Dale's alighment USE to have a great name, but I went there recently and the son now runs the show and my impessions have not been good. I will not be going back.
And of course, if you EVER go to Richmond Frame and Alingment I'll never talk to you again unless they give you $400 to give to me.
Dale's alighment USE to have a great name, but I went there recently and the son now runs the show and my impessions have not been good. I will not be going back.
And of course, if you EVER go to Richmond Frame and Alingment I'll never talk to you again unless they give you $400 to give to me.
Registered User
Joined: Sep 1998
Posts: 561
From: Vancouver, BC, Canada
If you're in Richmond, the Firestone dealer just off #3 across from the Canadian Tire. They did mine after my K-member went in, did a good job. The guy did 3 test drives to get the steering wheel centered, full printouts (before and after), let me watch and it was $49 + tax.
Registered User
Joined: Feb 2003
Posts: 344
From: white rock, bc
Originally posted by sleeperZragtop
johnny go to OK tire on 104th near the mall...the guy knows me he did kals for very cheap...cash, no tax
johnny go to OK tire on 104th near the mall...the guy knows me he did kals for very cheap...cash, no tax
hope that helps
Registered User
Joined: Apr 2000
Posts: 24
From: Vancouver BC
Originally posted by mrak
i go tireland on the northshore
Talk to Paul, he's the owner
hes in my dads corvette club and he aligned all of our cars
sorry dont have the number
i go tireland on the northshore
Talk to Paul, he's the owner
hes in my dads corvette club and he aligned all of our cars
sorry dont have the number
Paul is a good guy.. I should know I work there. We have his 96 C4 collectors edition stored in the shop right know.
# is 980 1578
Registered User
Joined: Apr 2000
Posts: 24
From: Vancouver BC
Originally posted by mrak
oh you did see this thread!
anyways paul's a good guy
i thought he was selling the vette (c4) cause he go thte z06?
oh you did see this thread!
anyways paul's a good guy
i thought he was selling the vette (c4) cause he go thte z06?
(no offence
Thread
Thread Starter
Forum
Replies
Last Post
WobblySausage
LT1 Based Engine Tech
6
Oct 7, 2015 02:44 PM
WobblySausage
Drivetrain
4
Oct 7, 2015 10:09 AM