New England Dyno and Tuning - Pre Season dyno day
#1
New England Dyno and Tuning - Pre Season dyno day
Let me give my best try at a scoop aka "Will McDonnough" style....
According to an unidentified source close to New England Dyno and Tuning owner Dean Hoffman ( www.nedyno.com ) there will be a Pre Season dyno day at NEDT world headquarters located at 7 Lenora St in Worcester Mass on March 22 with a rain / snow day for March 29.
This will give us a chance to get our combinations dialed in and ready for battle as New England Dragway opens on April 2 (that's 64 days for those counting )
I also heard from a reliable source that "The Loch Ness Monster" will be on the rollers at the spring dyno day You guys know....something you've all heard alot about but haven't seen on the dyno in along time
Seeing how I am the official chef of our legendary dyno days I'll be firing up the grille and bringing some of my special Foxboro cut terriaki steak for the festivities to go along with our usual burgers and hot dogs
You can sign up at www.nedyno.com
Uncle Marc
According to an unidentified source close to New England Dyno and Tuning owner Dean Hoffman ( www.nedyno.com ) there will be a Pre Season dyno day at NEDT world headquarters located at 7 Lenora St in Worcester Mass on March 22 with a rain / snow day for March 29.
This will give us a chance to get our combinations dialed in and ready for battle as New England Dragway opens on April 2 (that's 64 days for those counting )
I also heard from a reliable source that "The Loch Ness Monster" will be on the rollers at the spring dyno day You guys know....something you've all heard alot about but haven't seen on the dyno in along time
Seeing how I am the official chef of our legendary dyno days I'll be firing up the grille and bringing some of my special Foxboro cut terriaki steak for the festivities to go along with our usual burgers and hot dogs
You can sign up at www.nedyno.com
Uncle Marc
#2
Re: New England Dyno and Tuning - Pre Season dyno day
Originally posted by 1st and goal
Seeing how I am the official chef of our legendary dyno days I'll be firing up the grille and bringing some of my special Foxboro cut terriaki steak for the festivities to go along with our usual burgers and hot dogs
Seeing how I am the official chef of our legendary dyno days I'll be firing up the grille and bringing some of my special Foxboro cut terriaki steak for the festivities to go along with our usual burgers and hot dogs
HELL YES
well I guess this means i should get up off my a$$ and put my rear end in and start that 5-speed swap I've been putting off for so long
#13
Originally posted by TunedPort 335
That was harsh!!
That was harsh!!
so you think your sled will be able to make it for this John? or will we have to walk next door to quest and see it still sitting there
#15
Yea I should be there.
Mike called me yesturday and the engine is all done.
Unfortanatly I had to have a custom blower pulley made because of the clearances of the new ATI balancer and the MSD crank trigger.The pulley takes 3-4 weeks to get.
You get that 5 speed swapped in yet slacker?
TTYL
John
Mike called me yesturday and the engine is all done.
Unfortanatly I had to have a custom blower pulley made because of the clearances of the new ATI balancer and the MSD crank trigger.The pulley takes 3-4 weeks to get.
You get that 5 speed swapped in yet slacker?
TTYL
John