Machine shops
Registered User
Joined: Mar 2000
Posts: 181
From: Cruisin'
Hi Tom, There is a place in Holliston that does great work.
Call "ABT Machine".
They are strictly an automotive machine shop and have a good rep for their work. Not sure on cost but it shouldn't be too bad. I have personally used them and never had a problem.
Hope this helps
Joe
Call "ABT Machine".
They are strictly an automotive machine shop and have a good rep for their work. Not sure on cost but it shouldn't be too bad. I have personally used them and never had a problem.
Hope this helps
Joe
Registered User
Joined: Apr 2000
Posts: 300
From: Hudson,MA currently Worcester, MA
Joe,
You were supposed to keep that a secrete.
They are the best but try to keep that on the down low, don't want them to get so busy that it takes forever to get stuff done.
Never had a problem with them.
You were supposed to keep that a secrete.
They are the best but try to keep that on the down low, don't want them to get so busy that it takes forever to get stuff done.
Never had a problem with them.
Registered User
Joined: Mar 2000
Posts: 181
From: Cruisin'
Originally posted by 96Z28SS
Joe,
You were supposed to keep that a secrete.
They are the best but try to keep that on the down low, don't want them to get so busy that it takes forever to get stuff done.
Never had a problem with them.
Joe,
You were supposed to keep that a secrete.
They are the best but try to keep that on the down low, don't want them to get so busy that it takes forever to get stuff done.
Never had a problem with them.
Good to see that someone else in is the know
Registered User
Joined: Jan 2000
Posts: 150
From: Taunton MA
Do they do big block chevy's? I need a engine builder that can rebuild the 435hp 427 from my fathers Corvette. He has already had 2 done at Reid's and they did one ok and really botched the other one so he is not going back to them.
Registered User
Joined: Apr 2001
Posts: 328
From: Natick, MA
mrgto
horsepower in ellington ct does great work, they build drag, street and busch north car motors. they rebuilt my friends 427 afx motor for his car. i know alot of people who have gone there. great work...
horsepower in ellington ct does great work, they build drag, street and busch north car motors. they rebuilt my friends 427 afx motor for his car. i know alot of people who have gone there. great work...
Thread Starter
Registered User
Joined: Feb 2001
Posts: 106
From: Uxbridge, MA
Anyone have the number and address for ABT. I just got the rebuild kit for the motor but need the block cleaned up first. Hopefully I can get the car done this summer, cant wait for tommorow to be over 3 ase tests.
Registered User
Joined: Jul 2001
Posts: 292
From: Hudson
Originally posted by 96Z28SS
Joe,
You were supposed to keep that a secrete.
They are the best but try to keep that on the down low, don't want them to get so busy that it takes forever to get stuff done.
Never had a problem with them.
Joe,
You were supposed to keep that a secrete.
They are the best but try to keep that on the down low, don't want them to get so busy that it takes forever to get stuff done.
Never had a problem with them.
Registered User
Joined: Apr 2000
Posts: 300
From: Hudson,MA currently Worcester, MA
nope Nedyno did your LS6.
by the way what was the hurry in getting the motor done if it has been sitting for a year and the car still isn't put together and running.
Just kidding
by the way what was the hurry in getting the motor done if it has been sitting for a year and the car still isn't put together and running.
Just kidding
Registered User
Joined: Jul 2001
Posts: 292
From: Hudson
Originally posted by 96Z28SS
nope Nedyno did your LS6.
by the way what was the hurry in getting the motor done if it has been sitting for a year and the car still isn't put together and running.
Just kidding
nope Nedyno did your LS6.
by the way what was the hurry in getting the motor done if it has been sitting for a year and the car still isn't put together and running.
Just kidding
Thread
Thread Starter
Forum
Replies
Last Post
tommalcolm
Computer Diagnostics and Tuning
2
Sep 11, 2015 03:39 PM