where to mount msd?
Thread Starter
Registered User
Joined: Jul 2000
Posts: 352
From: Mentor, OH USA
where to mount msd?
well i got done installing my nx kit this weekend and i cannot seem to find a good spot under the hood to mount my msd digital 6, where are some good spots to mount it? any pics would be great too!! thanks for any help guys! 
------------------
1995 Polo Green Z28 M6, T-Tops, Blueprinted 355 cid, 11.8:1 comp., JE Forged Pistons, GMPP Forged Steel Crank, Meziere, Star Stage 3 Kevlar, BBK 58MM, 1 3/4" Hooker LT's with Mufflex Y Pipe, LT4 Hotcam Kit, Mildly Ported Heads, and a ton of other stuff.....
12.931 @ 109.073 w/2.084 60ft. with bad traction and clutch slipping bad through 1st and 2nd
343rwhp/348rwtq (old motor)
no new times or dyno #s with new motor
NX wet kit, electric cutout, LS1 ft. brakes, LS1 DS waiting to install!!
------------------
1995 Polo Green Z28 M6, T-Tops, Blueprinted 355 cid, 11.8:1 comp., JE Forged Pistons, GMPP Forged Steel Crank, Meziere, Star Stage 3 Kevlar, BBK 58MM, 1 3/4" Hooker LT's with Mufflex Y Pipe, LT4 Hotcam Kit, Mildly Ported Heads, and a ton of other stuff.....
12.931 @ 109.073 w/2.084 60ft. with bad traction and clutch slipping bad through 1st and 2nd
343rwhp/348rwtq (old motor)
no new times or dyno #s with new motor
NX wet kit, electric cutout, LS1 ft. brakes, LS1 DS waiting to install!!
Registered User
Joined: May 2002
Posts: 39
From: Fl/Tn
Gary-
When I had a '96 Z I mounted my 6AL on the driver side shock tower. It was a tight fit. Have fun spraying that beast!
------------------
1981 Z28
8.696 @ 152.23 N/A
2000 SVT Lightning
Mods: Yes
www.wickedfast.net
When I had a '96 Z I mounted my 6AL on the driver side shock tower. It was a tight fit. Have fun spraying that beast
!------------------
1981 Z28
8.696 @ 152.23 N/A
2000 SVT Lightning
Mods: Yes
www.wickedfast.net
Thread
Thread Starter
Forum
Replies
Last Post
88IROC_Z
Computer Diagnostics and Tuning
2
Jul 22, 2015 11:38 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Jul 10, 2015 02:23 PM