timing?????????
Registered User
Joined: Feb 2002
Posts: 702
From: Houston, TX USA
What size shot? Do you have a power programmer or other (they advance the timing)?
Need just a little more info..
normally a 100 shot is fine with a stock timing curve
150 shot needs 2-4 degrees pulled out, depending on the kit
My experience is NOS needs more timing pulled out then the NX kits do.
Need just a little more info..
normally a 100 shot is fine with a stock timing curve
150 shot needs 2-4 degrees pulled out, depending on the kit
My experience is NOS needs more timing pulled out then the NX kits do.
Thread Starter
Registered User
Joined: Jan 2003
Posts: 319
From: illinois
thinking anywhere from 100-150 dos dry kit. i don't have a power programmer or power chip. i have nothing that advances timing. so if i need to pull timing what to i have to buy to do that ?
Registered User
Joined: Feb 2002
Posts: 702
From: Houston, TX USA
If you are running the stock computer timing, you can run a 100 shot safely, providing it doesn't go lean. Just make sure you run nothing but premium gas.
I would recommend running a bottle thru, and then pull your plugs and look for any signs of detonation.
I would recommend running a bottle thru, and then pull your plugs and look for any signs of detonation.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
ChrisFrez
CamaroZ28.Com Podcast
0
Feb 1, 2015 08:26 AM