I am trying to troobleshoot a friend's nx kit. I checked the wire to the solenoids from the relay and it is not getting power when the wot and arming switch are on, the noids are not clicking. This is what I have read with a multimeter at the relay.

black wire 12v
White wire Ground 0hm
green wire go to the solenoids 0v
and red wire 0v and 30 ohms

What should it read at the red wire from the wot and activation switch? Volts or ohms? And how much thanks

We have also already tried a new relay


Jose`

 

Figured it out, We had the WOT switch wire to ground whoops.