Nossle placement ?
04-28-2006, 09:24 AM
#2
Registered User
Join Date: Feb 2004
Location: Moore OK
Posts: 2,182
Re: Nossle placement ?
Most kits I have seen say 2-6 inches from throttle body. I don't think it could hurt, because the dry kits spray from way up where the MAF is. I wouldn't do it with the stock elbow though, afraid fuel would puddle up in the donkey dong.
04-28-2006, 09:48 AM
#3
Registered User
Join Date: Dec 1969
Location: San Diego, CA
Posts: 4,950
Re: Nossle placement ?
I had my NX wet system nozzle mounted about 2.5' back from the throttlebody and wasn't getting near the HP gain as a friend with a similar setup and his nozzle mounting about 8'' back. I discussed the differences with my tuner, Jeff Creech, and he felt that I wasn't getting the full benefit from the cooling affects/concentration of the nitrous because of the nozzle placement. I relocated my nozzle closer but haven't used or re-dyno'd yet.
04-28-2006, 10:08 AM
#4
Registered User
Join Date: Mar 2005
Location: Aurora, IL
Posts: 12,312
Re: Nossle placement ?
Originally Posted by OBE1 95Z28
I had my NX wet system nozzle mounted about 2.5' back from the throttlebody and wasn't getting near the HP gain as a friend with a similar setup and his nozzle mounting about 8'' back. I discussed the differences with my tuner, Jeff Creech, and he felt that I wasn't getting the full benefit from the cooling affects/concentration of the nitrous because of the nozzle placement. I relocated my nozzle closer but haven't used or re-dyno'd yet.
Thread
Thread Starter
Forum
Replies
Last Post
ElkyRacer
West South Central
5
05-27-2003 03:28 PM