This thread should help with basic wiring questions, if any unique diagrams are needed please let me know.

Base single nozzle system


Single stage, FPSS, and MSD window switch


Single stage. purge, our digital window switch, FPSS, and 12v timing retard

 

Zex and Mallory 685


Single stage, FJO Progressive, FPSS, and TPS activation


Single stage, MSD window switch, FPSS, Trans brake/2 step


Single stage, LS1 Timing Tuner, our window switch

 

our 4 button switch panel...System, Purge, Heater, and Remote Opener

 

Great diagrams Ray. I noticed LS1tech has a sticky with these kinds of diagrams. Maybe we can get this stickied here too as this does come up quite frequently.

 

Thanks Ray!

 

definately agree, sticky!

 

what about the single stage with the mallory 685 , fpss,bottle heater ,and purge.

 

use this one



the violet wire from the 685 will connect to the FPSS and pin 85 on the relay

the yellow wire from the 685 will tap into pin 87

 

Ray, I just got the FJO controller, do you guys carry the solenoid driver module?

Thanks,

Jody J.

 

Made this on as it should be pretty popular



Heater,

 

bump

 

Is it possible to make this a sticky?

Ray, is there a way I can get a hi res sent to me of these wirings?

Thanks,

Jody J.

 

Sticky please.

 

this saved my *** earlier, a google search didnt help.it turned out that i had a bad relay ,from dyno tune nitrous systems ,ebay, but i was trying to trace the relay wires,and this was exactly what i was looking for.

 

Ray, on post #2 on the 3rd diagram with the t-brake single stage, where is the 2 step actually wired into that? i didnt see that anywhere on the diagram