N2O Tech Discussion for the use of Nitrous Oxide

n2o will most likely to cause damage to.....

Thread Tools
 
Search this Thread
 
Old Jul 19, 2003 | 10:57 AM
  #1  
TMDZ28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2002
Posts: 1,450
From: LA, So Cal
n2o will most likely to cause damage to.....

what is the most famous damage caused by nitrous?? i mean internal engine....spun bearing?? roast the piston rings....please educate me....thanks
Old Jul 19, 2003 | 11:17 AM
  #2  
RacinLT1's Avatar
Registered User
 
Joined: Oct 2000
Posts: 1,620
From: Dover DE
most common would be melted pistons or broken ring lands.
If you break a pistons,the damage can be significant,rods,crank,block heads etc.
Old Jul 19, 2003 | 11:49 AM
  #3  
TMDZ28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2002
Posts: 1,450
From: LA, So Cal
Originally posted by RacinLT1
most common would be melted pistons or broken ring lands.
If you break a pistons,the damage can be significant,rods,crank,block heads etc.
hmmm scary..... .......do you think summit forged rebuild kit is strong enough to handle 200 shots, like 2 bottle every month??
Old Jul 19, 2003 | 01:11 PM
  #4  
RacinLT1's Avatar
Registered User
 
Joined: Oct 2000
Posts: 1,620
From: Dover DE
any forged piston can handle it,heck my stock pistons have been hit with a 150 SHOT (not plural,sorry it's a pet peeve).

But you can break forged parts if the tuneup isnt good.

But yes the summit kit is decent.
Old Jul 20, 2003 | 11:21 PM
  #5  
TMDZ28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2002
Posts: 1,450
From: LA, So Cal
i'm kinda scared to spray 150 shot. i got a walbro inline fuel pump ready to be installed. i'll try 100 shot first. i'm worried about my tranny though. i set my window switch to turn on at 3200 and shut off at 5400. my tranny shifting point is 5800 - 6000 i think. do you think my tranny in a lot of danger when i'm spraying?? i never spray through shifts though..... ....thanks RacinLT1
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
68camaroboltz
Fuel and Ignition
2
Oct 5, 2015 01:46 PM
DelSoto
Forced Induction
4
Sep 19, 2015 05:31 AM
blaze309
General 1967-2002 F-Body Tech
2
Sep 8, 2015 05:27 PM
themex2002
2010 - 2015 Camaro Interior, Exterior, Paint & Body, Electronics/Car Audio
1
Sep 2, 2015 03:47 PM




All times are GMT -5. The time now is 03:37 PM.