Okay, I am in the process of building an all forged 383. Eagle forged crank, 6" H-beams, SRP 11.8/1 pistons, heads, cam, and the rest of the goodies. My question is, how much nitrous could I run on this setup, and how do I do it safely. I have got an NX kit right now which has never been on my car. With my heads, compression will be around 12.0/1. I figure I already have the NX kit so I might as well use it. Just don't how big a shot will be safe? Thanks for the help, if you need any other details just let me know.
Seth

 

I hope someone here can help me out with this. If you need anymore details on the motor or anything just let me know. Thanks again.

 

you should be fine to run as big of a shot as you want as long as you have it tuned right, and you have enough fuel. Compression does play a roll with N2O, but you should be very safe with all forged internals and enough fuel.

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.