Alright guys I just got a quick question about installing the fogger nozzle on a lt1. Where is the best place on the elbow to put the nozzle?? Also I see that there is threads on the end of the nozzle, what exactly do I do to incorporate these threads in the installation. Any info is very much appreciated. Thanks, Dustin.

 

On the NX nozzles, they have a nut that you put on both sides of the intake elbow, then screw the nozzle into it.

 

The nozzle must be at least 6" away from the TB. Try to use a locking nut instead of a standard nut cause it might vibrate loose.

 

I am thinking right after that big resenator tube. If i did it before the tube would there be a chance of some of it getting caught down in there??

 

Not to try and steal you thread but I was kind of curious if you could on a 1LE elbow run it up where the resonator tube should be? Kind of hide it where the part of the elbow comes down

 

That would be a good idea and I dont see why you couldnt. Anyone??

 

Yes it can be done, and it has

 

I've got the 1le delete plug hallowed out and the nossle going up through there.