Just a teaser pic of my mess, err progress
#3
Re: Just a teaser pic of my mess, err progress
Originally Posted by Moshbmx1
Holy mess of wires....
#4
Re: Just a teaser pic of my mess, err progress
And here's what it looks like now. Still not as clean looking as I want but its an improvemetn. All I'm waiting for is my trickflow elbow now.
Last edited by speed_demon24; 08-09-2006 at 04:42 PM.
#6
Re: Just a teaser pic of my mess, err progress
Originally Posted by Moshbmx1
Thats what mine looks like. I think its pretty clean......
#7
Re: Just a teaser pic of my mess, err progress
normally for the nozzle it is a 1/16th pipe tap, a regular tap WILL NOT WORK. they are pretty hard to find. on this kit there is a bulk headed type fitting in which the nitrous nozzle threads into.
#10
Re: Just a teaser pic of my mess, err progress
Originally Posted by HarrisSpeedWorks
Yeah, just use the Nozzle nut to secure the nozzle. If you don't want to use the nozzle nut we have a drill and tap set available.
Matt
Matt
#11
Re: Just a teaser pic of my mess, err progress
Originally Posted by HarrisSpeedWorks
Yeah, just use the Nozzle nut to secure the nozzle. If you don't want to use the nozzle nut we have a drill and tap set available.
Matt
Matt
#13
Re: Just a teaser pic of my mess, err progress
Originally Posted by speed_demon24
Should I just put a little RTV around the nut so there isn't any vacume leak them?