im just curious. i added a NS 150 wet shot to my 406 and was wondering the TQ gains. and i want to add 200 shot and get ride of the 150 shot and was wondering its the tq gains of this also.

 

I have the mods and dyno #'s in the sig on motor. With a 100 shot of NX gas I made 525 rwtq. So you could use that for an Idea.

 

Over the entire powerband you'll see massive gains but the insane gains are in the low RPM range in relation to the N/A powerband. Short shifting could actually get you a better timeslip while saving the engine from excessive RPM. Goodluck and hold on tight! Lets hear some numbers ASAP please!

Then it's back to the engine doctor for another 15lbs of magic gas

 

Take the Hp you are jetted for *5252/RPM you activate at.

150*5252/3000=262ft/lbs
200*5252/3000=350ft/lbs

You will show less torque of course the higher the RPM's are whn you activate it.

 

That is very true on the dyno my peak HP was 406 rwhp with gas and 324 without. Ok on motor at 3200 rpm I made like 230 rwhp and on gas at 3200 rpm I made 400 rwhp. Over 170 hp to the wheels was gained at 3200 rpm so you cannot beat that.

Jason