I have searched for a while but haven't come up with too many things. I read a post about a guy who had his nozzle hidden under the intake on his LT1. Does anyone have a setup like this? Any pics of stealthy installs would be awesome!

Jeff

 

i have a realy good one for LS1s, as soon as my roll of film is up ill PM u some pics later.

 

gb95zconv,
Pics would be awesome! If you could also take pics of where you have the solenoids mounted that would be cool. Thanks!

Jeff

 

You could tap the nozzle in back of the intake, windsheild side, and run the Nitrous line undeneath the car, away from moving parts. Solenoids could be hidden there, too. I know a guy who did it that way but I have no pics.

 

http://ahotvent.com/Motor/Motor%20in%20car%202.JPG

There is picture of my hidden system. Can you find it? Haha

Actually my single nozzle is installed on the bottom of the hard elbow. I passed tech and had many people overlook it. All my hoses and wires are loomed and or black. With the soleniods black, they are very easy to over look even though they were right on top of the motor. The DP system on the other hand...If you can't see that, then your dumb.

 

Umm you must be really blind not to see that!! I think you got the pics messed up that is the direct port setup

 

Haha...you misread my post. That is a picture of my DP, as a joke.

I also have a "second stage" single nozzle that is installed in the bottom of the elbow. The picture doesn't show it as they aren't in place yet, but the nozzles were right on top of the valve covers. Everything was black or covered in black and many many people overlooked the install. I went through tech many times with just the single nozzle (before the direct port was on the car) on the car and never had it checked.