FJO Prog controller on 96 t/a
Thread Starter
Registered User
Joined: Dec 2006
Posts: 53
From: Medford MA
FJO Prog controller on 96 t/a
ive finished installing a HSW kit on my car and have finished wiring my fjo controller and am hung up un getting the controller to read my rpm's.
i tapped off of the blue wire on the 'gray/clear' pcm harness for tps activation and it works great.
for the rpm pickup i went off of the white wire (TACH OUTPUT) on the 'red' pcm harness and i cannot get the rpm trigger to activate at all. i tried the /4 and /2 setting for the rpm and my controller never picked it up. am i on the wrong wire or is there something else that im unaware of? Any help is much appreciated.
i tapped off of the blue wire on the 'gray/clear' pcm harness for tps activation and it works great.
for the rpm pickup i went off of the white wire (TACH OUTPUT) on the 'red' pcm harness and i cannot get the rpm trigger to activate at all. i tried the /4 and /2 setting for the rpm and my controller never picked it up. am i on the wrong wire or is there something else that im unaware of? Any help is much appreciated.
, that insulation is pretty effing hard! 
Thread
Thread Starter
Forum
Replies
Last Post