N2O Tech Discussion for the use of Nitrous Oxide

dyno tune nitrous????

Thread Tools
 
Search this Thread
 
Old Jan 20, 2005 | 01:21 PM
  #1  
4SFEDZ's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 666
From: A-town, TX
dyno tune nitrous????

has anyone heard of dyno tune sales, they have a nitrous kit for a lt1 for 399$ the only things i can think i would need is a window, and purge. anything else i may be missing let me know what yall think!! http://www.speedshop.org/store/scrip...?idproduct=110

thanks terry,
Old Jan 20, 2005 | 02:05 PM
  #2  
NXRicky's Avatar
Registered User
 
Joined: Dec 2004
Posts: 110
From: Lakeside City
Re: dyno tune nitrous????

fuel safety switch, bottle heater, NHRA blow down fitting and Tube.
Ricky
Old Jan 25, 2005 | 01:05 PM
  #3  
96Z28SS's Avatar
Registered User
 
Joined: Apr 2000
Posts: 300
From: Hudson,MA currently Worcester, MA
Re: dyno tune nitrous????

I ran the dynotune stuff in my car good stuff they are a sponser on LS1tech.com
Old Jan 25, 2005 | 04:37 PM
  #4  
chevy94c's Avatar
Registered User
 
Joined: Nov 1998
Posts: 1,088
From: Mass
Re: dyno tune nitrous????

I have seen alot of there stuff. It's very nice piece and good price too.
Old Jan 26, 2005 | 02:28 PM
  #5  
4SFEDZ's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 666
From: A-town, TX
Re: dyno tune nitrous????

do yall think i need a blow down tube since im putting it in my rear tire area? also they have a air fuel ratio sensor to make sure it dont run too lean would that be better than a fuel safty switch? and is a bottle heater necesary?

http://www.speedshop.org/store/Scrip...p?idproduct=67 99$
http://www.speedshop.org/store/Scrip...p?idproduct=17 119$

are these good prices for these products? are they good?
Old Jan 26, 2005 | 05:58 PM
  #6  
captaindbol's Avatar
Registered User
 
Joined: Nov 2004
Posts: 377
From: La Porte, TX
Re: dyno tune nitrous????

yes, not really and yes. They have good products and good prices to boot. Their products seem more geared to someone with experience who is building or upgrading a system. Most wholesalers(Dyno Tune) included, do not include the little extras or the fool proof directions.
Old Jan 26, 2005 | 06:48 PM
  #7  
Dean77's Avatar
Registered User
 
Joined: Jan 1999
Posts: 197
From: Mass
Re: dyno tune nitrous????

Thanks for the good words guys!

Captaindbol,
Typically, side by side with the competiton, we shine because we do include the little extras - down to every electrical connection and fitting you may need. Our directions, from feedback we receive, we are told they are top notch. If you see where we can improve let us know we are always trying to do better and feedback is always appreciated! Just to calrify we are not a wholesaler - we are a retailer that sells direct. We aspire to succeed with the direct selling model similar to Dell. We pass along this savings to our customers. Things may change as we continue to grow but this is where we are today!

Thanks again all,
Dean
www.dynotunenitrous.com
Old Jan 26, 2005 | 08:51 PM
  #8  
captaindbol's Avatar
Registered User
 
Joined: Nov 2004
Posts: 377
From: La Porte, TX
Re: dyno tune nitrous????

Dean,

I'm sorry if I may have offended you. What I posted is my (personal opinion) based on the installation of kits from just about every major manufacturer. If you will check you'll see that I am a repeat customer, buying both direct and through ebay. You even went out of your way to make things right when one of my orders was not shiped correctly. I will continue to plug your products whenever the oportunity arises and will consider you again when I need good parts at a great price. If you want some honest feedback, checkout the Edelbrock manual, its the best I've come across yet. From install to tuning to troubleshooting and repair its got everything.

Sincerely,
James Baldwin
Old Jan 26, 2005 | 09:23 PM
  #9  
96SilverRam's Avatar
Registered User
 
Joined: Jan 2003
Posts: 780
From: Tejas
Re: dyno tune nitrous????

I just want to chime in here real quick and give my .02 I have recently purchased a couple of the electronic guages and the switch guage center from Dynotune and have to say they make some of the absolute nicest guages. I'm even more impressed with the customer service I have received from Dan at Dyno-tune. He is top-notch when it comes to service and sales. I have been extremely happy with everything I have purchased from Dyno-tune.

If your reading this Dan, Thanks again. Mike
Old Jan 27, 2005 | 02:19 AM
  #10  
Wicked93Z's Avatar
Registered User
 
Joined: Jan 2005
Posts: 22
Re: dyno tune nitrous????

I ordered a system from Dyno Tune a couple days ago. Hoping to see it soon! There's a couple other items that I saw and want to get. Will be ordering from there again before too long.

Danny
Old Jan 28, 2005 | 04:55 PM
  #11  
Dean77's Avatar
Registered User
 
Joined: Jan 1999
Posts: 197
From: Mass
Re: dyno tune nitrous????

James,
No offense taken at all. I apoligize if I came across that way. I appreciate your response and your business. I have seen most of the install manuals out there but not the Edelbrock. I will have to check it out.

Mike,
I will pass the good words to my partner Dan!

Danny,
Good luck with the kit - you will love it!

Thanks again guys for the good words!

Dean
www.dynotunenitrous.com
Old Feb 2, 2005 | 11:41 PM
  #12  
"White Knight"'s Avatar
Registered User
 
Joined: Nov 2002
Posts: 1,544
From: Michigan
Re: dyno tune nitrous????

I like their billet bottle brackets
Old Feb 3, 2005 | 12:37 AM
  #13  
Wicked93Z's Avatar
Registered User
 
Joined: Jan 2005
Posts: 22
Re: dyno tune nitrous????

Originally Posted by White Knight
I like their billet bottle brackets

They do look awesome.
Old Feb 4, 2005 | 06:09 PM
  #14  
Dean77's Avatar
Registered User
 
Joined: Jan 1999
Posts: 197
From: Mass
Re: dyno tune nitrous????

Thanks guys!

Dean
www.dynotunenitrous.com
Old Feb 5, 2005 | 02:59 AM
  #15  
396D1SS's Avatar
Registered User
 
Joined: Jan 2005
Posts: 609
From: lakeland, fl
Re: dyno tune nitrous????

A friend of mine is using dyno tune nitrous and he loves it



All times are GMT -5. The time now is 04:21 AM.