Dicussion: Velocity of Purge
!["White Knight"'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%2385a3bd' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>"</text></svg>)
Thread Starter
Registered User
Joined: Nov 2002
Posts: 1,544
From: Michigan
Dicussion: Velocity of Purge
I want to start this thread about the velocity of a purge. And how to manipulate it....
I'm trying to think if this can be calculated. But wouldn't you need to know the volume being flowed?? besides the psi and diameter of the lines
something to ponder.......
I'm trying to think if this can be calculated. But wouldn't you need to know the volume being flowed?? besides the psi and diameter of the lines
something to ponder.......
Thread Starter
Registered User
Joined: Nov 2002
Posts: 1,544
From: Michigan
Re: Dicussion: Velocity of Purge
now we're getting somewhere....
It's like 1:00a.m. right now so i can't think but maybe tommarow i'll start putting some info together and see what numbers i can get. I am curious as too how high it is, when it exits the line.
It's like 1:00a.m. right now so i can't think but maybe tommarow i'll start putting some info together and see what numbers i can get. I am curious as too how high it is, when it exits the line.
Registered User
Joined: Feb 2001
Posts: 1,450
From: Belleville, IL
Re: Dicussion: Velocity of Purge
and all this time I thought you worked for Vortech! 
What is your recommendation on how far apart the purge solenoid should be from the nitrous solenoid? I always tried to keep my purge as close as possible to the nitrous solenoid (connected if possible like w/ the Iceman solenoids).
What is your recommendation on how far apart the purge solenoid should be from the nitrous solenoid? I always tried to keep my purge as close as possible to the nitrous solenoid (connected if possible like w/ the Iceman solenoids).
Thread Starter
Registered User
Joined: Nov 2002
Posts: 1,544
From: Michigan
Re: Dicussion: Velocity of Purge
Yes I do. I am the General Manager for NX.
Ricky
Ricky
Last edited by "White Knight"; Feb 3, 2005 at 04:28 PM.
Registered User
Joined: Dec 2004
Posts: 110
From: Lakeside City
Re: Dicussion: Velocity of Purge
Originally Posted by mongse_1
and all this time I thought you worked for Vortech!
What is your recommendation on how far apart the purge solenoid should be from the nitrous solenoid? I always tried to keep my purge as close as possible to the nitrous solenoid (connected if possible like w/ the Iceman solenoids).
What is your recommendation on how far apart the purge solenoid should be from the nitrous solenoid? I always tried to keep my purge as close as possible to the nitrous solenoid (connected if possible like w/ the Iceman solenoids).
Ricky
Registered User
Joined: Dec 2004
Posts: 110
From: Lakeside City
Re: Dicussion: Velocity of Purge
Originally Posted by White Knight
Just the guy i have been needing to talk to. I have a question on particular parts. Can you get NX fuel rails and NX nitrous rails individually (the ones in the 90006 kit)? Yes I can sale you one rail at a time if that is what you want. and how much do they run? 100.00 retail Also can you buy the just the MAF end/nozzle by it's self--like if you have everything else and just want to convert to the MAF set-up.No it would need to be a conversion kit Because i have a friend that wants to do this, and he has just the basic set-up right now.
Ricky
Thread
Thread Starter
Forum
Replies
Last Post
350350
Fuel and Ignition
14
Aug 11, 2015 12:03 PM