I am going to do heads and cam soon. The cam i like is CC 306, and get a good set of flowing heads with it. Now has anyone used this cam with Nitrous?? Like a 100 or 125 shot? Anyone with any insight on this would be greatly helpfull.
Brad

 

I will let you know tonight. I am about to spray a 100 shot for the first time.

Michael

------------------
1995 Formula, 355 Forged, ATI Super Damper, M6, B&M Shifter, Spec Stage 3 Carbon Clutch, 4.10, 1LE Drive Shaft, CAI, CC 306 Cam, Pro Mag 1.6 RR's, Hooker LT, 58mmTB, AFPR, 26 lb. inj., Stage 2 Heads, 1LE Elbow, MSD6AL, NGK TR55, LT4KM, !AIR, !EGR, !CAT, BMR SFC, BMR STB, BMR Boxed LCA, BMR Panhard, NX Wet Kit, NX Purge Kit

 

Sweet let me know. Let me know what you are with and w/o Nitrous. I'll be waiting to here your times. Good luck.
Brad


[This message has been edited by hotrod18_69 (edited August 15, 2002).]

 

The CC306 will work just fine. I'm considering putting a system in the Hawk w/ its CC306.... Maybe I'll wait till I get the 12 Bolt first though.....

Anything Under about 250hp won't justify a "Nitrous Cam" unless it is in an all out race motor. JMO.



------------------
Kurtis Tamez
LT4-396.com
97 Z28 LT4-396
94 Firehawk LT1-396
Team NW F-Body

 

Guy in our club runs a CC306 in his stroker 95 Z28. Ran 10.82 at 127 I think back in the spring. Did 6.92 at 99 a couple weeks ago in the 1/8th. Can't be all bad. We're swapping the HOT cam out of ours over the winter for a CC306. The profile may just favor a healthy shot with good heads and exhaust.