Best kit for an LT1
#3
Re: Best kit for an LT1
Well I am running th Nitrous Works kit. Its the wet kit that you can set a shot from 75-175. Its a really good kit, and on a unmodified engine I would recommend it because it is usually set to run about 20% richer to be on the safe side.
#4
Re: Best kit for an LT1
wet system- nx
dry stystem- i would go with the zex. im using it and it works bueatiful. i have bolt-ons, but my af ratio was quite good when i put her on the dyno. and the horsepower gains from it r pretty substantial. that's not just from my car, but some of my friends with the same system r having the same sucess. read my sig and see what i put down with only a zex 100 shot. not to mention how easily it can be installed
dry stystem- i would go with the zex. im using it and it works bueatiful. i have bolt-ons, but my af ratio was quite good when i put her on the dyno. and the horsepower gains from it r pretty substantial. that's not just from my car, but some of my friends with the same system r having the same sucess. read my sig and see what i put down with only a zex 100 shot. not to mention how easily it can be installed
#5
Re: Best kit for an LT1
Top quality, unbeatable pricing - Best kit for the dollar!
http://www.dynotunenitrous.com/store...?idproduct=110
Dean
http://www.dynotunenitrous.com/store...?idproduct=110
Dean
Last edited by Dean77; 04-21-2005 at 12:12 PM.
#7
Re: Best kit for an LT1
Yes that NX maff kit or the single nozzle systems are both the best quality system on the market.
The maff kit will also come with a TPS switch.
Let me know if you have any questions.
Dave
The maff kit will also come with a TPS switch.
Let me know if you have any questions.
Dave
#9
Re: Best kit for an LT1
Originally Posted by lt1hatesme
is that a wet kit or a dry kit?? i read what it said but i couldnt really tell.
maybe i have no idea what im talking about, but isnt a wet kit safer?
maybe i have no idea what im talking about, but isnt a wet kit safer?
Dean
#11
Re: Best kit for an LT1
The gemini twin kits is pretty cool looking for dual nozzles. The MAF kit is probably the cleanest install kit so far. Complete instruction with solid tech support if need be. Toll Free calling the tech line. You can not go wrong with either kit.
Ricky
Ricky
#13
Re: Best kit for an LT1
Originally Posted by Cnadian_Camaro
I run the nitrous works wet kit for the lt1 its the only wet kit I could find with a plate.
I am running a NOS 5151 kit for a TPI motor on my LT1 also a plate system, no complaints so far.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
01-23-2015 01:13 PM
CARiD
Supporting Vendor Group Purchases and Sales
0
01-14-2015 04:00 AM
CARiD
Supporting Vendor Group Purchases and Sales
0
12-26-2014 04:20 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
12-04-2014 11:56 AM