I got the instructions but a good web page with pics is a whole lot better. Thanks Alan

------------------
97 Black Z28 Convertible
A4 & 3.42
MODS ARE
Ram Air Hood with Airbox, K&N Air Filter, FLP Longtubes, Brola CatBack, 160 PowerStat, 224/236@50,.536/.555,114LSA, Ported Heads, 1.6 Crane Gold RRs, Guide Plates, Hardened One Piece Push Rods, Titanium Locks & Seats, CSI water pump, LS1 DS, Ported MAF Ends, LT4KM, Air Foil, !TB, LT4 Valve Covers, Jamex Springs, KYB-AGX Shocks, STB, SFC, LCA, LCA Relocator Brackes, Adj Panhard, Transgo Shift Kit, Yank ST3200, Comp T/A Drag Radials
New Times Coming This Weekend!

 

TTT, I know someone out there has a good one. Just asking you to share.

 

Use a search engine, there is a ton of info out there.

 

Damn Steve I was hoping to use your garage

Seriously, Brents fix it site has a couple of general N20 sites at there is:

www.bfranker.badz28.com/fbody/guides.htm

And this site shows a stealth install

www.gafba.com/articles/article.asp?tid=31

There is a guy with a Ws6 that has a VERY clean setup but you'll have to do a search for him.

But it is a pretty easy install the only thing that was a pain on mine is hooking up the window and dig 6.

If you have questions post a specific one and you'll get answers pretty quick



------------------
93 Purple grey TA, WS6 chrome rims, Firehawk hood, hypercoil spring, kyb AGX's. Hotcam fully ported heads, mac headers etc..., 3200 viglante, rebuilt tranny all the good stuff! 12.69 @105.88, 1.74 60ft with Nitto's

 

thanks.
I already did a search and found thoses before i asked. thats why i asked. not many pics there. but thanks anyway. I have been having trouble finding pics of were people put the solinods and shark nozzle on lt1's.
Wicked do u like the dig 6? trying to decide if I have any need for one? Alan

 

Yeah I like it alot, even noticed a difference in the way the car ran which really supprised me! That said I may not need it much longer I just purchased and DFI system with a nitrous program I may look into. I did alot of looking for a timing retard and and for the money dig 6 is a good way to go you have other features!


First I put my selenoids on the fuel rails. But I was afraid they would get too hot. I now how them on my BMR STB took about 5 minutes to install

The shark nozzle can go anywhere 2-4 inches from the TB. A common place it the temp sensor and move the sensor closer to the filter. I put my nozzle on the drivers side of the elbow. Drop top Steve has a trick *** setup going into the bottom of the silencer.

I'd take pics but my ride is getting the tranny rebuild....again. If you are planning on doing it a later next week I'll get pics. If you don't have a STB you can pick one up REAL cheap and it does make for a nice mounting location!

Let me know if you have anymore ????

------------------
93 Purple grey TA, WS6 chrome rims, Firehawk hood, hypercoil spring, kyb AGX's. Hotcam fully ported heads, mac headers etc..., 3200 viglante, rebuilt tranny all the good stuff! 12.69 @105.88, 1.74 60ft with Nitto's

 

lol, last night I put the n2o in the bmr stb(i guess great minds think alike)lol. I have an airbox so I put fuel on the top pass. side tb bolt right up against the air box. What did u use for a bottle stand? alan

 

Friend of mine is making a aluminum plate for the spare tire well. Should be pretty trick. There is a guy that is selling a really nice setup for 50 if you want pics and email addy I can get them for you monday.

------------------
93 Purple grey TA, WS6 chrome rims, Firehawk hood, hypercoil spring, kyb AGX's. Hotcam fully ported heads, mac headers etc..., 3200 viglante, rebuilt tranny all the good stuff! 12.69 @105.88, 1.74 60ft with Nitto's

 

Thanks, but I think I will try to make one myself. It does not look to hard. Alan

 

after seeing that stealth install write-up I'm gonna redo the bottle install I just did today. That looks very sturdy and professional.