Posted by Verbs:

After doing some research, I have decided to hold the first AZ fbody meeting on June 29th, at 2pm in the Phoenix Public Library.
I figured this is as central of a location as any, and it won't be noisy.

The only negative, is that I will require everyone to pay $1 upon entering the room, as the room costs $10 per hour to rent, and we have it rented for two hours. There is a lot to go over in this first meeting, and I do expect it to last about 1.5-2 hours.

We are not allowed to eat in the room, or else we will be charged $25!!! So please eat lunch before hand!!!!

Anyone who does not have $1 to provide upon entry will not be allowed in. I'm sorry to be such a stickler about this, but we must be fair to everyone. SO DON'T FORGET YOUR $1!!!!

I also want to ask that everyone bring a pad of paper and a pen, so that ideas can be jotted down, and you can remember what took place at the meeting.

During this first meeting a lot of the rules and regulations are going to be decided upon, so if there is a meeting you don't want to miss, it is this one. I even encourage the passive members to participate in this first meeting just so they can get a feel for the club and give their input as to what they would like to get from the club as a passive member.

Remember, those that attend the meetings will be the ones who shape the club into what it will be. If you don't attend meetings, then don't gripe that things aren't being done the way you'd like.

Officially, we now have 70 people expressing interest to be members, and have 3 sponsors. All 3 sponsors will be lending their services to us, as all of them are aftermarket shops. We will go over discounts/benefits at the meeting.

I hope to go over the following things at the first meeting:

1. Brief ice-breaker getting to know everyone
2. Creation of board positions to be filled at a later date
3. Rules to be put on the agenda for a vote
4. Dues/fees
5. First Fbody event
6. Technical Discussion/Lesson
7. What is expected/desired from the club
8. Networking within our club
9. How often to have meetings
10. AZ Fbody website/webmasters
11. Introduction of sponsors and discussion
12. Other issues not listed above

This is in no particular order, but just a few things that I would like to cover in our first meeting. I know that there will be other issues that will be brought up, and we will discuss those as well.

If people wish to do so, towards the end of the meeting we can see if anyone would either like to get dinner, and/or go to the Pavillions car show together. I'm sure there will be a few that would like to do each, so if you have nothing planned for that night, keep the calendar open just in case!!!

The address of the library is:

1211 N. Central Ave.
Phx. AZ 85004.

If anyone has questions about how to get there, go to http://pac.lib.ci.phoenix.az.us/web/hoursframe.html for directions.

The meeting is in Meeting Room A, and I have no clue where that is, but when you walk in the people at the front can tell you how to get there.

Please RSVP to me via email whether or not you will be coming to the meeting, so I can get a head count to get the appropriate amount of chairs in our meeting room.

I hope to see you all there, and most importantly, DO NOT FORGET YOUR PEN AND PAPER AS WELL AS YOUR $1 !!!!!!!!

Matt


------------------
99 Camaro SS
Not the fastest car but I still love it!
2001 Suzuki GSXR750-SOLD
License Plate - R1ETR
163mph in a 65...police don't like that!

 

Thanks for the reminder Ghost....I still haven't gotten confirmations from a lot of people yet on whether they will or will not be there.

I still need everyone to shoot me an email to let me know if they can or cannot go.

 

Thanks, I was wondering if it was still going to happen.
Hubby and I are looking forward to it.

------------------
Valerie
79 Trans AM.. Dream in the Making (0 to 60.. bring a beer, it'll be a while)
2001 Chevy 2500HD ext.cab, DURAMAX/Allison tranny, 4X4, LS yadda, yadda, yadda..
2002 SS Convertible #675 A4, Bilstiens, Dual- dual exhaust,Kenny Brown Sub frame connectors AZ LIC. Plate DSRTFXBest time 13.852 @ 102.2

 

Verbs, I have been thinking a bit and have decided I will show up to see what can happen with all of this. I will be there.

------------------
mods: Just a few...
http://www.public.asu.edu/~nicolasd

 

How the tides have turned

Welcome aboard.

 

Oh, and BTW, we are now up to about 85 members and have 4-5 sponsors.....

 

I will probably be there too. The wife may also come along if she wants to

------------------
Jeff
98 Z28 13.4@107.3/312.3RWHP 324.9RWTQ
-direct flow air lid, K&N air filter, exhaust cutout w/ McCord power plate.
99 GTP 14.6@96
-K&N air filter, 3.25" pulley, Tranny cooler, 3" int. pipe with stock mufflers.

 

More the better.



------------------
95 Z28 A4 blue with black racing strips

flowmaster exhaust,mac headers,az-speed marine 52mm tb and cold air intake,hypertech programmer,power pully's, msd ingition,eibach pro kit,hotchkis rear supension,hotchkis strut tower,performance spoiler,drag radails
Best ET 13.69
Best MPH 100.52

 

I'll be there. Where is the library at downtown? What are the cross streets please.

 

I was going to go until......


Nah but I'll be there with Mike Krein probably. Also whats the deal with the discount on labor? If you could shoot me an email on this, I was thinking its an actual discount but from what I have been hearing its just the normal "fbody rate" Maybe im not informed. I'll be there with my dollar.


------------------
1993 Purple Pearl M6 Z28
Jackstand Queen
Pic 1 Pic 2 Pic 3
Nu-Tek built forged 396, Pro Performance heads, F.A.S.T, Street Twin, CCXE 236/242, Hooker LT's, True Duals, Comp R Lifters, Pro Magnum 1.6 RR's, Arizona Speed and Marine 58mm TB, Accel 300+, Moroso CAI, Pro 5.0, 36# SVO Injectors. It'll run someday.

Future Mods: 12 Bolt and 200 Wet Shot.

 

I sent you mail on the first meeting....cross streets are Central south of McDowell on the East side of the road.

Glad to have you aboard!

 

We are going to discuss all of this at the meeting. But not before that...sorry, ya gotta wait.

 

Biotch!
http://www.public.asu.edu/~nicolasd/.../firedevil.gif
http://www.public.asu.edu/~nicolasd/...cs/flipoff.gif


------------------
mods: Just a few...
http://www.public.asu.edu/~nicolasd

[This message has been edited by Nic00Z28M6 (edited June 24, 2002).]

 

I am still in. I will be bringing my girlfriend as well. See you guys there.

------------------
Andy

1994 Z28 M6
Borla Catback Exhaust, Manual Fan Switch, SLP Cold Air Intake, SLP Clutch Disc, SLP Pressure Plate, Hypertech 160* Thermostat, Airfoil, TB Bypass, ACDelco Pro Platinum Plugs, ACDelco Plug Wires, '99 C5 Alloy Rims,
Nitto NT555 Extreme ZR Tires, 255/45ZR-17 Front, 275/40ZR-18 Rear, ASCD Big Block Hood, Kenwood CD Player, Kenwood 10-Disc Changer, 2 Rockford Fosgate 10's, Alpine Alarm...many mods still to come.

 

I got bored today so decided to give something a try. I just threw together a quick webpage for the AZ F-body Club. It is my first attempt at it so sorry if it isn't bling blingin but oh well.

http://www.angelfire.com/az3/azfbody/

------------------
99 Camaro SS
Not the fastest car but I still love it!
2001 Suzuki GSXR750-SOLD
License Plate - R1ETR
163mph in a 65...police don't like that!