True Dual exhaust for sale! with pics!
Thread Starter
Registered User
Joined: Oct 2000
Posts: 1,665
From: Livonia, Mi
True Dual exhaust for sale! with pics!
http://community.webshots.com/user/mike94zlt1
Sorry I don't have any on car pics, but once you see the size of the mufflers you will see that ground clearance is not an issue. This is a 2 1/2" system custom made for me. It dumps before the rear axle, and has an h-pipe. It has been modified to clear aftermarket rear ends, my 9" with my BMR torque arm clears it with no problems. It's using Summit part# FLO-325108 mufflers, they are 3" thick, 5" wide and 6"? maybe 7"? long. They sound AMAZING, but unfortunately living in an apartment complex I have to be considerate of the neighbors. They are much quieter than bullets, however they are very deep and absolutely scream (its a good scream
) at high RPM. I did have to cut the system off right after the collectors, but it could easily and cheaply be repaired. The good news is, it will now fit practically any Hooker, Jet Hot, QTP, Pacesetter or any other major brand header. I don't know about kooks or stainlessworks. The system is new, I had it made at the end of last summer, and the rear half and the single chamber mufflers were added when I put my 9" in the car, about mid november. I'm asking for $275, the mufflers alone were $170 and they don't even have 500 miles on them. The rest of the system has maybe 3,000. I live in the livonia area, and I will NOT ship this. I can meet you within a reasonable distance if necessary. Thanks for looking!
Sorry I don't have any on car pics, but once you see the size of the mufflers you will see that ground clearance is not an issue. This is a 2 1/2" system custom made for me. It dumps before the rear axle, and has an h-pipe. It has been modified to clear aftermarket rear ends, my 9" with my BMR torque arm clears it with no problems. It's using Summit part# FLO-325108 mufflers, they are 3" thick, 5" wide and 6"? maybe 7"? long. They sound AMAZING, but unfortunately living in an apartment complex I have to be considerate of the neighbors. They are much quieter than bullets, however they are very deep and absolutely scream (its a good scream
) at high RPM. I did have to cut the system off right after the collectors, but it could easily and cheaply be repaired. The good news is, it will now fit practically any Hooker, Jet Hot, QTP, Pacesetter or any other major brand header. I don't know about kooks or stainlessworks. The system is new, I had it made at the end of last summer, and the rear half and the single chamber mufflers were added when I put my 9" in the car, about mid november. I'm asking for $275, the mufflers alone were $170 and they don't even have 500 miles on them. The rest of the system has maybe 3,000. I live in the livonia area, and I will NOT ship this. I can meet you within a reasonable distance if necessary. Thanks for looking!
Registered User
Joined: Oct 2002
Posts: 1,129
From: Detroit, MI
Re: True Dual exhaust for sale! with pics!
Pending Mikes approval (I think we got it), this bad boy is SOLD and going to be on the green machine here in a few weeks. Also, do you want the cash now? Or can you wait a few weeks until I get back home? I will be flying in on Sunday the 24th, maybe we can get that thing on the same day even? Let me know what you think buddy.
Thanks
Charlie
Thanks
Charlie
Last edited by charliediss; Apr 1, 2005 at 01:56 PM.
Thread Starter
Registered User
Joined: Oct 2000
Posts: 1,665
From: Livonia, Mi
Re: True Dual exhaust for sale! with pics!
Hey Charlie, yeah you have first dibs on it. I dont mind holding it for you, its in my parents garage out of the way. You would need your headers on first, and then getting this on should be simple after that. Like I said it would need to be welded to a 3 bolt collector, or we could probably clamp it. This should sound sweet on an LT1 because theyre so deep already.
Registered User
Joined: Oct 2002
Posts: 1,129
From: Detroit, MI
Re: True Dual exhaust for sale! with pics!
Originally Posted by Mike94ZLT1
Hey Charlie, yeah you have first dibs on it. I dont mind holding it for you, its in my parents garage out of the way. You would need your headers on first, and then getting this on should be simple after that. Like I said it would need to be welded to a 3 bolt collector, or we could probably clamp it. This should sound sweet on an LT1 because theyre so deep already.
Thanks Mike,
Charlie
Registered User
Joined: Aug 2002
Posts: 2,356
From: Madison Heights, MI
Re: True Dual exhaust for sale! with pics!
$225 sounds like a great deal to whoever picks it up. I think cat-backs should be abolished because....true duals make the F-body sound amazing and the way it should. That pretty much says it all. Give your LT1 f-body some ballsand buy this man's exhaust. 
Thread Starter
Registered User
Joined: Oct 2000
Posts: 1,665
From: Livonia, Mi
Re: True Dual exhaust for sale! with pics!
Originally Posted by CamaroBoy96Z28
$225 sounds like a great deal to whoever picks it up. I think cat-backs should be abolished because....true duals make the F-body sound amazing and the way it should. That pretty much says it all. Give your LT1 f-body some ballsand buy this man's exhaust.
You have no idea how bad *** this exhaust sounds, ESPECIALLY if you have a cammed car. This exhaust was cut right behind the headers, and can EASILY be modified to fit any LS1 or LT1 f-body car with long tube headers. I wish I could get a soundclip of it. I let my friend drive my car around the block the other day, and the only time I've ever heard my car is when I'm inside it, or its idling when I'm working on it. Not that it doesnt sound completely awesome from inside the car, but when he hit it going down the street, I had to go change my underwear. It's not that good, its better.
Registered User
Joined: Oct 2002
Posts: 1,129
From: Detroit, MI
Re: True Dual exhaust for sale! with pics!
Mike, I am sorry man. I had some financial misfortunes on my trip back home in the form of an opti failure. It was one of my last days on leave and I had to dish out 700 and some change to get this done in a timely manner. I dont even have enough to buy gaskets to put my headers in! I am sorry for backing out.
Charlie
Charlie
Registered User
Joined: May 1999
Posts: 824
From: LIVONIA MICH. USA
Re: True Dual exhaust for sale! with pics!
Originally Posted by Mike94ZLT1
You have no idea how bad *** this exhaust sounds, ESPECIALLY if you have a cammed car. This exhaust was cut right behind the headers, and can EASILY be modified to fit any LS1 or LT1 f-body car with long tube headers. I wish I could get a soundclip of it. I let my friend drive my car around the block the other day, and the only time I've ever heard my car is when I'm inside it, or its idling when I'm working on it. Not that it doesnt sound completely awesome from inside the car, but when he hit it going down the street, I had to go change my underwear. It's not that good, its better.
Thread Starter
Registered User
Joined: Oct 2000
Posts: 1,665
From: Livonia, Mi
Re: True Dual exhaust for sale! with pics!
Originally Posted by strokin polo
Mike, I am sorry man. I had some financial misfortunes on my trip back home in the form of an opti failure. It was one of my last days on leave and I had to dish out 700 and some change to get this done in a timely manner. I dont even have enough to buy gaskets to put my headers in! I am sorry for backing out.
Charlie
Charlie
Hey Charlie, its ok, I've been there before and I understand, I hope everything works out for you! And Kevin saw it when he came over the other day to buy my rims, thanks for the input!
Last edited by Mike94ZLT1; May 3, 2005 at 04:12 PM.