performance parts for sale
#1
Registered User
Thread Starter
Join Date: Dec 1998
Location: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Posts: 2,407
performance parts for sale
available now.....
MAF sensor 50.00
LT1 Scanmaster 150.00 SOLD
ATI Balancer just rebuilt by ATI. hasn't been on a motor since rebuild. I rebuilt it because i was chasing down the WRONG problem, oh well. 225.00, for an LT1 SOLD
LS1 rear brake conversion only a few thousand miles on parts from brand new.
every part you need 200.00
29" x 10" Hoosier Drag Slicks, only 5 passes on them, i bought them from Joe Overton, but haven't used them, and don't think i plan on using them at all. they are in perfect shape! 175.00 for the pair.
available now as well
Dynatech Dynaspark distributor... only made 12 passes with it on the car.
paid 613 to my door, 500 to yours. it is going back to get checked before i sell it, i am **** that way, lol!!! SOLD
as soon as i get it back from DTS a Full Locker for 35 spline 9" rear axle. it is getting rebuilt and will be for sale once i get it back. 455 new, selling for 250
also MSD 6AL, 130.00 SOLD
also MSD Coil from wifes old Z with plug and play harness, coil has a few hundred miles on it. 60.00
MSD Digital Retard box, 110.00 SOLD
also available custom made Moroso Blue Max wires, with 2200 degree heat shield. $100.00, best wire avaialble. can send pics if interested. I am selling as i don't need them anymore, i need to make up all new wires. they also only have 12 passes /run time on them.
i know i have a few more good items to list, i will do so in a few days when i get a chance to look at my parts.
all prices are FIRM, non negotiable.
thanks for looking
MAF sensor 50.00
LT1 Scanmaster 150.00 SOLD
ATI Balancer just rebuilt by ATI. hasn't been on a motor since rebuild. I rebuilt it because i was chasing down the WRONG problem, oh well. 225.00, for an LT1 SOLD
LS1 rear brake conversion only a few thousand miles on parts from brand new.
every part you need 200.00
29" x 10" Hoosier Drag Slicks, only 5 passes on them, i bought them from Joe Overton, but haven't used them, and don't think i plan on using them at all. they are in perfect shape! 175.00 for the pair.
available now as well
Dynatech Dynaspark distributor... only made 12 passes with it on the car.
paid 613 to my door, 500 to yours. it is going back to get checked before i sell it, i am **** that way, lol!!! SOLD
as soon as i get it back from DTS a Full Locker for 35 spline 9" rear axle. it is getting rebuilt and will be for sale once i get it back. 455 new, selling for 250
also MSD 6AL, 130.00 SOLD
also MSD Coil from wifes old Z with plug and play harness, coil has a few hundred miles on it. 60.00
MSD Digital Retard box, 110.00 SOLD
also available custom made Moroso Blue Max wires, with 2200 degree heat shield. $100.00, best wire avaialble. can send pics if interested. I am selling as i don't need them anymore, i need to make up all new wires. they also only have 12 passes /run time on them.
i know i have a few more good items to list, i will do so in a few days when i get a chance to look at my parts.
all prices are FIRM, non negotiable.
thanks for looking
Last edited by taner; 12-25-2005 at 01:18 PM.
#2
Registered User
Thread Starter
Join Date: Dec 1998
Location: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Posts: 2,407
Re: performance parts for sale
couple of more things to add....
Holey Black Pump, will support up to 350 hit of spray comfortably, it is a low pressure pump. about 10 minutes of run time on this unit.
$100
Dynotune N2O delay controller, brand new, NEVER USED. $55.00
Holey Black Pump, will support up to 350 hit of spray comfortably, it is a low pressure pump. about 10 minutes of run time on this unit.
$100
Dynotune N2O delay controller, brand new, NEVER USED. $55.00
#8
Re: performance parts for sale
taner, the drive system is different, and they list 2 different ones, one it spline drive and one is pin drive?
http://www.dynotech-eng.com/dynaspark.htm
http://www.dynotech-eng.com/dynaspark.htm
#9
Registered User
Thread Starter
Join Date: Dec 1998
Location: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Posts: 2,407
Re: performance parts for sale
it is pin drive off of the camshaft, i didn't know they were different.i only thought corvettes were like that, at least the 94's were.
#10
Re: performance parts for sale
Originally Posted by taner
it is pin drive off of the camshaft, i didn't know they were different.i only thought corvettes were like that, at least the 94's were.
93-94 f-body , 92-94 vette were non vented(spline drive), 95-97 f body, 95 -96 vette, 94-96 b body were vented(pin drive)
I have heard of some overlap in the 94 f-bodys and vettes , haven't seen any though
#13
Registered User
Thread Starter
Join Date: Dec 1998
Location: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Posts: 2,407
Re: performance parts for sale
retard and 6al removed from car. ready to be shipped.
rock i will send you an email.
dynaspark and scanmaster may be spoken for but i don't want to say for sure until it is confirmed.
waiting for update on locker.
i also have a blue anodized throttle body plate that has "SS" on it. $22 shipped
rock i will send you an email.
dynaspark and scanmaster may be spoken for but i don't want to say for sure until it is confirmed.
waiting for update on locker.
i also have a blue anodized throttle body plate that has "SS" on it. $22 shipped
#15
Registered User
Thread Starter
Join Date: Dec 1998
Location: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Posts: 2,407
Re: performance parts for sale
tentatively sold....
Dynaspark
scanmaster
msd digital retard
msd 6al
locker
thanks!
Dynaspark
scanmaster
msd digital retard
msd 6al
locker
thanks!
Last edited by taner; 12-08-2005 at 07:44 AM.