LT1 and L98 Parts for sell local
07-30-2002, 06:22 PM
#1
Eternal Member
Thread Starter
Join Date: Apr 2002
Location: Warren / Mi
Posts: 1,064
LT1 and L98 Parts for sell local
Trying to make some room in the garage. looking to sell local.
96 WS6 cat back with tips. For dual cat system. 12 HP over stock TA exhaust. very good condition $100.00
SOLD SOLD TCI trans cooler new in box never opened. comes with mounting hardware $50.00
B&M Holeshot 3000 Stall converter nonlock up. About 50 miles on it. Fits 30 sline 84-93 700 r4 or 93-96 4l60e nonlockup. $300.00
Stock converter 30 spline 700 r4 $50.00
87 305/350 TPI roller Compucam 2032 part #99470-1. about 6000 miles on it. I think it was like 455/465 specs. $100.00
Stock cam 87 305 $50.00
Stock 87 TPI 350 exhaust manifolds and y pipe very good condition. $50.00
Seats 87 IROC black and gray all. good condition $100.00. Left front upper to small holes, right front like new,rear lowers like new, back fading at top but no hole very good condition. Did not know it was fadded until I removed it. $100.00
I have more but don't want to put to big a thread. If interested call 586 558/6694
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
[This message has been edited by Chris Ja (edited August 01, 2002).]
96 WS6 cat back with tips. For dual cat system. 12 HP over stock TA exhaust. very good condition $100.00
SOLD SOLD TCI trans cooler new in box never opened. comes with mounting hardware $50.00
B&M Holeshot 3000 Stall converter nonlock up. About 50 miles on it. Fits 30 sline 84-93 700 r4 or 93-96 4l60e nonlockup. $300.00
Stock converter 30 spline 700 r4 $50.00
87 305/350 TPI roller Compucam 2032 part #99470-1. about 6000 miles on it. I think it was like 455/465 specs. $100.00
Stock cam 87 305 $50.00
Stock 87 TPI 350 exhaust manifolds and y pipe very good condition. $50.00
Seats 87 IROC black and gray all. good condition $100.00. Left front upper to small holes, right front like new,rear lowers like new, back fading at top but no hole very good condition. Did not know it was fadded until I removed it. $100.00
I have more but don't want to put to big a thread. If interested call 586 558/6694
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
[This message has been edited by Chris Ja (edited August 01, 2002).]
07-30-2002, 07:34 PM
#2
Registered User
Join Date: Jan 2000
Location: Davison, MI (near Flint)
Posts: 1,167
If u got any Lt1 cams or nitrous accessories in there, e-mail me. 
------------------
1991 Firebird 305
Eric Natzke
"It ain't Stock"
http://members.aol.com/j007golden/91firebird.html
AIM: J007Golden
------------------
1991 Firebird 305
Eric Natzke
"It ain't Stock"
http://members.aol.com/j007golden/91firebird.html
AIM: J007Golden
07-30-2002, 08:06 PM
#4
Registered User
Join Date: Dec 2000
Location: Midland,Mi
Posts: 840
Ill take the Tranny Cooler if it will work on a 4l60e
------------------
94 A4 Geen Trans Am ,InTrax drop springs 17" ws-6 on 275/40 kumhos in front Nitto 275/40/17s in back
K&N FIPK, 160* thermo, 3.73,flowtech cut out, no cat, dynomax muffler
"Your Flow-master isnt as loud as my No-Master"
------------------
94 A4 Geen Trans Am ,InTrax drop springs 17" ws-6 on 275/40 kumhos in front Nitto 275/40/17s in back
K&N FIPK, 160* thermo, 3.73,flowtech cut out, no cat, dynomax muffler
"Your Flow-master isnt as loud as my No-Master"
07-30-2002, 08:58 PM
#5
Eternal Member
Thread Starter
Join Date: Apr 2002
Location: Warren / Mi
Posts: 1,064
Hink You would like that for a hun. I couldn't sell you that because I can't keep up with you now let alone with that on your monster.
Have you heard anything from GM yet? I can't remember when we went out there? Takes about 6 weeks. I think we went about a month ago?
TSnake trans cooler don't come specific trannys. In the Summit Racing book they are $65.95 plus shipping. It is a very good cooler and a lot of people use it on there f/bodys. It comes with the mounting hardware.
Part # in the Summit book is TCI-823800.
Eric did you get my email today about the valve covers?
No LT1 cam's or NOS parts.
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
[This message has been edited by Chris Ja (edited July 30, 2002).]
[This message has been edited by Chris Ja (edited July 30, 2002).]
Have you heard anything from GM yet? I can't remember when we went out there? Takes about 6 weeks. I think we went about a month ago?
TSnake trans cooler don't come specific trannys. In the Summit Racing book they are $65.95 plus shipping. It is a very good cooler and a lot of people use it on there f/bodys. It comes with the mounting hardware.
Part # in the Summit book is TCI-823800.
Eric did you get my email today about the valve covers?
No LT1 cam's or NOS parts.
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
[This message has been edited by Chris Ja (edited July 30, 2002).]
[This message has been edited by Chris Ja (edited July 30, 2002).]
07-30-2002, 10:37 PM
#6
Eternal Member
Thread Starter
Join Date: Apr 2002
Location: Warren / Mi
Posts: 1,064
Tsnake If you want the trans cooler let me know for sure.
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
07-30-2002, 11:14 PM
#7
Registered User
Join Date: May 2002
Location: St.Johns MI
Posts: 824
Chris,
Is there any way you can find out the exact cam spes and what the rpm range is??If so and it would compliment what I got and what I'm going to do I will take it off your hands.Shoot me some mail with the findings.Thank You .
James
------------------
91 Z-28 305 H.O. 210 RWHP
crane hi-6,holley reg,air foil,3:73 richmonds,Ed Wright stage 2 chip,msd wires,SLP headers,best e.t 14.4@99.02mph
95 S-10 Blazer 4.3l A4 W/230,000 original miles.Never been touched but getting tired.Still likes to do burnouts!!!!
Is there any way you can find out the exact cam spes and what the rpm range is??If so and it would compliment what I got and what I'm going to do I will take it off your hands.Shoot me some mail with the findings.Thank You .
James
------------------
91 Z-28 305 H.O. 210 RWHP
crane hi-6,holley reg,air foil,3:73 richmonds,Ed Wright stage 2 chip,msd wires,SLP headers,best e.t 14.4@99.02mph
95 S-10 Blazer 4.3l A4 W/230,000 original miles.Never been touched but getting tired.Still likes to do burnouts!!!!
07-31-2002, 03:41 AM
#8
Registered User
Join Date: Nov 2000
Location: MI
Posts: 3,978
i too second the motion for the superram..... 
damn accel.......i sent mine in many moons ago for their recal and haven't heard anything back yet.
eric, what nos parts are you looking for.......i'm getting rid of pretty much my whole kit so i might have something you need.
damn accel.......i sent mine in many moons ago for their recal and haven't heard anything back yet.
eric, what nos parts are you looking for.......i'm getting rid of pretty much my whole kit so i might have something you need.
07-31-2002, 04:39 AM
#9
Registered User
Join Date: Jan 2000
Location: Davison, MI (near Flint)
Posts: 1,167
Looking for a 10lb bottle and a nitrous pressure gauge and a fuel pressure saftey switch jeff.
Chris J, i got ur e-mail and I am gonna send u a picture as soon as possible.
------------------
1991 Firebird 305
Eric Natzke
"It ain't Stock"
http://members.aol.com/j007golden/91firebird.html
AIM: J007Golden
Chris J, i got ur e-mail and I am gonna send u a picture as soon as possible.
------------------
1991 Firebird 305
Eric Natzke
"It ain't Stock"
http://members.aol.com/j007golden/91firebird.html
AIM: J007Golden
07-31-2002, 06:06 AM
#10
Registered User
Join Date: Jun 1999
Location: The Motor City EASTSIDE!
Posts: 29
kandied91z, what exactly are you getting rid of? I was looking at getting a kit for the Stang soon. Let me know what you got.
thanks
------------------
Rick
1991 White Mustang GT, T5 (2.95 1st, converted AOD), King Cobra, Tri-Ax, Fortes, Hedman 1 5/8" shorties, LX taillights, K&N, Hawks Pulleys, 2 1/2" off-road H, dumped 3 chamber Flows, FMS 3.73, FMS aluminum driveshaft, ], 2000 GT suspension !tailpipes, !smog, !AC, !spare and jack, !foglights and bracket, !various insulation
1995 Black Camaro Z-28 M6, bolt-ons, NX@150hp (SOLD and missed)
2001 Black Dodge Durango R/T 5.9 AUTO
like my girl says.... "don't playa hate, participate"
thanks
------------------
Rick
1991 White Mustang GT, T5 (2.95 1st, converted AOD), King Cobra, Tri-Ax, Fortes, Hedman 1 5/8" shorties, LX taillights, K&N, Hawks Pulleys, 2 1/2" off-road H, dumped 3 chamber Flows, FMS 3.73, FMS aluminum driveshaft, ], 2000 GT suspension !tailpipes, !smog, !AC, !spare and jack, !foglights and bracket, !various insulation
1995 Black Camaro Z-28 M6, bolt-ons, NX@150hp (SOLD and missed)
2001 Black Dodge Durango R/T 5.9 AUTO
like my girl says.... "don't playa hate, participate"
07-31-2002, 07:33 AM
#11
Eternal Member
Thread Starter
Join Date: Apr 2002
Location: Warren / Mi
Posts: 1,064
Jeff you Have mail about polished wheels.
91ReddSledd I went over to Crane Cams and looked up the cam. Cam 2032 is now called a PowerMax Hydraulic Roller camshaft for computer controled vechicles. 87-89 Corvettes,Camaros and Firebirds factory equipped with 350 TPI engines. Adj. fuel pressure reg. is recommended for maximum performance. Basic RPM 2000-5500.
Specs 214/220 @112 452/465
This was recommended as the biggest cam Crane offered with factory TPI with no reprogramming to ECM.
Hopes this helps
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
91ReddSledd I went over to Crane Cams and looked up the cam. Cam 2032 is now called a PowerMax Hydraulic Roller camshaft for computer controled vechicles. 87-89 Corvettes,Camaros and Firebirds factory equipped with 350 TPI engines. Adj. fuel pressure reg. is recommended for maximum performance. Basic RPM 2000-5500.
Specs 214/220 @112 452/465
This was recommended as the biggest cam Crane offered with factory TPI with no reprogramming to ECM.
Hopes this helps
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
07-31-2002, 10:52 AM
#12
Eternal Member
Thread Starter
Join Date: Apr 2002
Location: Warren / Mi
Posts: 1,064
Jeff what recall are you talking about on the Super Ram? The lid?
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
07-31-2002, 06:30 PM
#13
Eternal Member
Thread Starter
Join Date: Apr 2002
Location: Warren / Mi
Posts: 1,064
TrouserSnake forget the email
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
[This message has been edited by Chris Ja (edited July 31, 2002).]
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
[This message has been edited by Chris Ja (edited July 31, 2002).]
07-31-2002, 08:19 PM
#14
Eternal Member
Thread Starter
Join Date: Apr 2002
Location: Warren / Mi
Posts: 1,064
TrouserSnake just picked up the trans cooler.
We took the IROC out and I got on it a little. Tire broke loose in 1st and when I hit second they were still screaming. He was shocked how quick the IROC is. I know it's not the fastest car around but it started life as a 15.5 car. I feel I did a good job getting it into the 12.9 from were I started.
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
We took the IROC out and I got on it a little. Tire broke loose in 1st and when I hit second they were still screaming. He was shocked how quick the IROC is. I know it's not the fastest car around but it started life as a 15.5 car. I feel I did a good job getting it into the 12.9 from were I started.
------------------
87 IROC L98 700R4 A few mods. Best et 12.96 at 110 mph
All motor No NOS or Supercharger.
96 WS6 FORMULA Best et 13.5 at 105 mph
07-31-2002, 09:41 PM
#15
Registered User
Join Date: Jan 2002
Location: Essex, Ont.
Posts: 156
Chris, what have you got done to get those #'s? I assume it is not a stock cam or heads.
Bob
------------------
'88 IROC stock 350 TPI, auto, stock 3.27 gears, headers, Flowmaster exhaust, all the free stuff---best et 13.88 @101.18 mph
Bob
------------------
'88 IROC stock 350 TPI, auto, stock 3.27 gears, headers, Flowmaster exhaust, all the free stuff---best et 13.88 @101.18 mph