LS1 heads with 918 springs, GTP 420 cam, stock intake and TB
Thread Starter
Registered User
Joined: Oct 1999
Posts: 3,531
From: Battle Creek, MI
LS1 heads with 918 springs, GTP 420 cam, stock intake and TB
I am going to a little more radical setup so I have no use for this stuff now.
Heads are 853 castings with about 75k miles. no problems at all. complete and assembled with rockers, comp 918 springs (only 500-800 miles on the springs), and valves. ready to bolt on and go or send em for porting. They already have the springs to work with this cam if you want it too.
GTP 420 cam. I emailed GTP to get the exact specs on it and this is the response I received:
I'll sell it all as a package for $450 shipped or I will go 250 for the cam, 200 for the heads and those options would be PLUS shipping.
Also have a stock ls1 intake for $50, stock TB for $50.
Heads are 853 castings with about 75k miles. no problems at all. complete and assembled with rockers, comp 918 springs (only 500-800 miles on the springs), and valves. ready to bolt on and go or send em for porting. They already have the springs to work with this cam if you want it too.
GTP 420 cam. I emailed GTP to get the exact specs on it and this is the response I received:
that number means 226/226-591/591-112+2. this is one of the best
street/strip cams i have with out going to monster specs to beat up the
valvetrain. needs good stall. will go to 7200 + with right valvetrain. chris marsh put this in the 10's
street/strip cams i have with out going to monster specs to beat up the
valvetrain. needs good stall. will go to 7200 + with right valvetrain. chris marsh put this in the 10's
Also have a stock ls1 intake for $50, stock TB for $50.
Last edited by Timberwolf; Nov 19, 2004 at 09:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM