How Much More RWHP Needed To Go From High 12's To High 11's?
How Much More RWHP Needed To Go From High 12's To High 11's?
Registered User
Joined: Aug 1998
Posts: 848
From: Rives Jct Mich. USA
T/A is right on... a rough rule of thumb is 100 HP = 1.0+- second loss and usually +10 mph in trap speed. This is usually the case when you add a hundred shot of juice.
That is what I was figuring last week when Redbird was running 12.30. I was GOING to squeeze a 35 HP shot for the 12.0 numbers I was looking for THIS weekend. BUT... wire came off of activation switch and... no runs made with squeeze.
HInk
[This message has been edited by Redbird (edited July 29, 2002).]
That is what I was figuring last week when Redbird was running 12.30. I was GOING to squeeze a 35 HP shot for the 12.0 numbers I was looking for THIS weekend. BUT... wire came off of activation switch and... no runs made with squeeze.
HInk
[This message has been edited by Redbird (edited July 29, 2002).]
Thread Starter
Registered User
Joined: May 2000
Posts: 833
From: Ann Arbor, MI
<font face="Verdana, Arial" size="2">Originally posted by Redbird:
T/A is right on... a rough rule of thumb is 100 HP = 1.0+- second loss and usually +10 mph in trap speed. This is usually the case when you add a hundred shot of juice.
That is what I was figuring last week when Redbird was running 12.30. I was GOING to squeeze a 35 HP shot for the 12.0 numbers I was looking for THIS weekend. BUT... wire came off of activation switch and... no runs made with squeeze.
HInk
[This message has been edited by Redbird (edited July 29, 2002).]</font>
T/A is right on... a rough rule of thumb is 100 HP = 1.0+- second loss and usually +10 mph in trap speed. This is usually the case when you add a hundred shot of juice.
That is what I was figuring last week when Redbird was running 12.30. I was GOING to squeeze a 35 HP shot for the 12.0 numbers I was looking for THIS weekend. BUT... wire came off of activation switch and... no runs made with squeeze.
HInk
[This message has been edited by Redbird (edited July 29, 2002).]</font>
Time will tell what happens? Give me three weeks and we shall see what happens?
Bill
------------------
Thanks,
Bill
Click here for my best strip time!
98 WS6, Nitto 315/35/17's,MAC Headders and Off Road Y-Pipe, Flowmaster American Thunder Catback, Vig 3200 Stall, TransGo Shift Kit, MTI Clear Lid, K&N Filter, TR55 NGK's, Taylor 8mm wires, EGR MOD & Other Free Mods. 12.84 @ 104.15 MPH 60ft 1.73.
Thread
Thread Starter
Forum
Replies
Last Post
Lt1son
Drivetrain
1
Dec 31, 2014 01:35 PM