Hey guys, i was half an hour from doin my break in on my cam... was filling coolent.... opened the bleeder screws on the lines... and on the one farthest away from the water neck my dumbass took the screw too far out... lost grip and its gone down to who knows where....
I cant start the car til I find another one... Ill pay almost anything for one right about now.... If anyone has one, knows where one is or anything PLEASEEEE HELP!!!

PM me or email me at Ekofahl1@emich.edu

Thanks in advance guys...

 

I don't have a bleeder screw for you, but you don't have to break in the cam in a LT1 or roller motors. Hope this saves you so time.

Later

LJ

 

Seek and ye shall find.

 

Thanks on that break in point... i figured that out when i was talkin to a guy at ramchargers about half an hour after I posted. ENded up gettin the screw at a dealership for 12 bucks thanks to a shoebox part number
Its runnin and runs good... idles a bit high with the pcmforless so it doesnt lope as much as I hoped... but its nice.. Havnt gotten on it yet... still a bit tenative

-ERic

 

Cool,
glad your up and running fine.
Also if you need changes in the programming give me a shout, I do alot of local programming here in michigan. More popular in the B-bodies and custom world.

LJ Mendoza
Qicsan2@yahoo.com
313 655-0945

 

Well Was up and running.... i cant get the poly locks to stay with the valves adjusted correctly and now i cant get the valves to even quiet down.... not to mentiton my oil pan gaskets pissing oil.... so ive got to deal with that now...
if anyones bored this weekend and wants to help out ill throw ya a 20 or a case or somthin, just gimmi a call
323-9687 im in the ann arbor area.

-eric