F/s: 94 Z28....
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
F/s: 94 Z28....
the Green Z is for sale......
it is in good shape, and well maintained. since i bought it here is what has been done....bought August 2002
Professionally rebuilt trans with Transgo shift, new rotors/pads all the way around. new hi flow cat installed last August. newer battery, ported lt1 intake, no more intake leak
Eagle F1's in great condition(rears have 1000 miles on them) fronts are about half worn, would consider swapping out rear tires for barely used Nittos. also 17" SS wheels on car. has stock 3.23 rearend in it. with 60k on it. i swapped 3.73 rear out for this complete assembly. i also installed BMR LCA's, Hotchkis Panhard Rod last year, axle also has BMR relocating brackets. also Scanmaster installed, Hooker catback, HPP3 plus
mileage is approximately 100,xxx, i will have to check. it is a T top car. also installed 1le front sway bar and rear sway bar, 1LE bellow. also 1le rear coils and springs installed late last year prior to storage, can include front 1LE front shocks and springs if interested.
also replaced pasenger side power window motor. installed a k&n FIPK, and also an MSD 6AL, i may take that off the car, MSD coil will stay on the car. Both low beams were also replaced last summer. car has been winter stored for last couple of yours
so i have done a few things to improve her, lol! well you know me. it is a nice driver! only took it to the track 2 times last year, had to see what it would run, lol! after all it is the wife's summer car. A/C is ICE COLD! pwr wdw, pwr lck, tilt, cruise, power dr. seat. tan cloth interior. no rips or tears, driver's side bolster shows its age.
if interested please let me know. just shoot me a pm or email me if you are interested.
thank you,
taner
it is in good shape, and well maintained. since i bought it here is what has been done....bought August 2002
Professionally rebuilt trans with Transgo shift, new rotors/pads all the way around. new hi flow cat installed last August. newer battery, ported lt1 intake, no more intake leak
Eagle F1's in great condition(rears have 1000 miles on them) fronts are about half worn, would consider swapping out rear tires for barely used Nittos. also 17" SS wheels on car. has stock 3.23 rearend in it. with 60k on it. i swapped 3.73 rear out for this complete assembly. i also installed BMR LCA's, Hotchkis Panhard Rod last year, axle also has BMR relocating brackets. also Scanmaster installed, Hooker catback, HPP3 plus
mileage is approximately 100,xxx, i will have to check. it is a T top car. also installed 1le front sway bar and rear sway bar, 1LE bellow. also 1le rear coils and springs installed late last year prior to storage, can include front 1LE front shocks and springs if interested.
also replaced pasenger side power window motor. installed a k&n FIPK, and also an MSD 6AL, i may take that off the car, MSD coil will stay on the car. Both low beams were also replaced last summer. car has been winter stored for last couple of yours
so i have done a few things to improve her, lol! well you know me. it is a nice driver! only took it to the track 2 times last year, had to see what it would run, lol! after all it is the wife's summer car. A/C is ICE COLD! pwr wdw, pwr lck, tilt, cruise, power dr. seat. tan cloth interior. no rips or tears, driver's side bolster shows its age.
if interested please let me know. just shoot me a pm or email me if you are interested.
thank you,
taner
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
lmao @ Dr. Weir, as you can see I was busy upgrading 
if i don't get a reasonable offer I will keep it, that is the upside. i have invested well over 2000 into the car over the last 1.5 years, that is pretty much the parts alone, not counting the labour.

if i don't get a reasonable offer I will keep it, that is the upside. i have invested well over 2000 into the car over the last 1.5 years, that is pretty much the parts alone, not counting the labour.
Last edited by taner; Mar 27, 2004 at 06:47 AM.
If there was a way I could afford to, I would do it! I miss that car and regret selling it. In many ways, I liked it better than the black Z I have now, not that there is anything wrong with that one. Im sure the wife would apreciate it to, as she is still mad I sold it.
Last edited by Dr. Weir; Mar 27, 2004 at 05:50 PM.
Originally posted by CanIroc
taner, they sure do like to drink our canadian "BIER".
Bob
taner, they sure do like to drink our canadian "BIER".
Bob
Hey Bob, I saw you sold you IROC and I got an email from the buyer (sorry I forgot your name). Did you guys have any trouble importing it?
Thread
Thread Starter
Forum
Replies
Last Post
locomotech
Parts For Sale
0
Oct 14, 2006 11:39 PM



