Autometer oil pressure gauge and sender for LS1's ONLY for sale
Thread Starter
Registered User
Joined: Oct 2000
Posts: 1,665
From: Livonia, Mi
Autometer oil pressure gauge and sender for LS1's ONLY for sale
http://community.webshots.com/album/300869809bXvDbQ
Scroll down, last 5 pictures. This is the factory cover that goes above the oil filter, I drilled and tapped it with a 1/8th NPT tap, and purchased the required brass adaptors to make this fit. I put a 90 degree bend in it to get the best clearance from the headers possible. I had this on my car for approx. 1,500 miles. Works great. $55 for everything, cover, adaptor, gauge plate, etc. Ready to bolt in, all you need to do is hook up power and ground, and run a signal wire down to the sender.
Scroll down, last 5 pictures. This is the factory cover that goes above the oil filter, I drilled and tapped it with a 1/8th NPT tap, and purchased the required brass adaptors to make this fit. I put a 90 degree bend in it to get the best clearance from the headers possible. I had this on my car for approx. 1,500 miles. Works great. $55 for everything, cover, adaptor, gauge plate, etc. Ready to bolt in, all you need to do is hook up power and ground, and run a signal wire down to the sender.
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM