Midwest Illinois, Indiana, Michigan, Ohio, and Wisconsin

any one want to know what i ran weds'

Old Oct 28, 2004 | 10:52 PM
  #1  
hemigtx001's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 301
From: warren, mi
any one want to know what i ran weds'

So does any one wanna know what the GTX ran? It Suprized me. And was thinkign about running it again this weekend, but debating if its worth it.
Old Oct 28, 2004 | 11:09 PM
  #2  
hemigtx001's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 301
From: warren, mi
Re: any one want to know what i ran weds'

i ran a best of 15.153 at 88.92. with spin off the line. the 60ft fro that run was 2.202 and my rt was .312. My best rt was .112, and my best 60 ft was 2.172. and my best 1/8th was 9.733 at 72.34
this is with the 20s. and the 3.55 one leg rear end. hopefully next spring/summer 3.92 or 4.10 lsd.
and if i was to run again this weekend i go ta feeling i would be hitting 14's if i take the subs out. spare off, and tailgate off i would be int he 14's and with the new gears next summer Low 14's
btw this is a Full size ram 1500 reg cab. short bed pickup. Stock. with just an intake. with stock exhaust. i have a clip of me running 15.6 and runnig 15.4
Old Oct 29, 2004 | 07:32 AM
  #3  
IROC5.7TPI's Avatar
Registered User
 
Joined: Nov 2000
Posts: 1,541
From: Sterling Heights, MI
Re: any one want to know what i ran weds'

Put a turbo on it
Old Oct 29, 2004 | 07:35 AM
  #4  
OneSickSix's Avatar
Registered User
 
Joined: May 2004
Posts: 532
From: Okemos, MI
Re: any one want to know what i ran weds'

nah. I think he needs NAWWWWWZZZZ
Old Oct 29, 2004 | 09:01 AM
  #5  
headingeast's Avatar
Registered User
 
Joined: Jun 2002
Posts: 95
From: mt. clemens, Michigan, USA
Re: any one want to know what i ran weds'

wow..that's quick....did you get it weighed?
Old Oct 29, 2004 | 09:51 AM
  #6  
IROC5.7TPI's Avatar
Registered User
 
Joined: Nov 2000
Posts: 1,541
From: Sterling Heights, MI
Re: any one want to know what i ran weds'

If that truck os 0001 of a limited production run I wouldn't be modding it or beating on it too much In fact I wouldn't even be driving it more than 100 miles a year.
Old Oct 30, 2004 | 10:19 AM
  #7  
hemigtx001's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 301
From: warren, mi
Re: any one want to know what i ran weds'

havent got it weighed yet. i want to stop at a weigh station pay them the 8 bux and have it weighed.but im guessing around 5000lbs. which for the weight its quick. but it should be in the 14's milan wasnt the greatest on weds. i woudl hook off the lights. then as soona s i passed the beems i would lose it. also it is a limited production. there were 433 made. as far asi know. and turbo only two systems avalable STS, = i dont like that one. and henesse = Waste of 20grand. for 20 grand i can have a company make me stuff for themotor and have the same power they claim to give you. N/A, Now KENNE BELLE on the other hand is in the process of working on a buddys vehicle. as a test vehicle for the 04 supercharger. = 600+ hp more hten likely. thererfore OWNAGE.
I dont relaly like beatingon it and i didnt consider it beating on it. No one BABY's An FBody id ont care what u say. uve gotten on it. once just to see what it would do at WOT. but hows lapeer's strip? arent they open till later in the year. maybe tomroo will be nice.
Old Oct 30, 2004 | 10:59 PM
  #8  
IROC5.7TPI's Avatar
Registered User
 
Joined: Nov 2000
Posts: 1,541
From: Sterling Heights, MI
Re: any one want to know what i ran weds'

Lapeer is a mudhole. I wouldn't go there if you payed me. Long story but they hate guys with newer EFI cars for some reason
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
magman
LT1 Based Engine Tech
7
Apr 15, 2016 03:08 AM
93 RedBird
Fuel and Ignition
4
Nov 15, 2015 08:24 AM
94Maroz28
LT1 Based Engine Tech
30
Oct 27, 2015 04:38 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 30, 2015 04:20 PM
1bad427ls1
Fuel and Ignition
4
Sep 23, 2015 01:12 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:46 AM.