I will be installing some Pro Mag's soon and was wondering if anyone had some experience with installing valvetrain on a LT1 and would like to help out. I will be doing the 1.6 Pro Mags, LT4 springs, keys, caps, shims, hardened pushrods, 7/16 studs and GMPP guideplates. My uncle supposedly has valvecovers made so you can adjust them while the engine is running so you dont get oil everywhere, so I am going to try and borrow those.

Also am I missing anything on my list for the install?

Here is my thread in LT1 Tech: http://web.camaross.com/forums/showt...50#post2946150

Thanks fella's. I know alot of the guys I sent PM's to are from Canton/Akron area, and I am willing to drive there for the instal to save everyone the long trip.

I am asking for help not only because I have no clue, but because I want to learn how to do it the right way. This isnt something I want to learn through trial and error.

-Dustin-

 

Huge thanks to:

Darkhorse
Grease
Cantonracer

Next time Rally's is on me

Thanks for helping me out fella's, now on to the intake manifold and lifters

-Dustin-

 

Let me know when your going to do the install. I can come down or you can come up to the shop. Always here to help the locals out. I did speed2much tophalf...he is from canton. If you need any other help just give a shout.

 

Well we are running into some rough spots right now as you can see in this thread. Let me know if you have any ideas about it.

http://web.camaross.com/forums/showthread.php?t=354975

I want to get it running right before I do anymore driving. I am thinking of adjusting them tomorrow while the engine is running in the lot here at my apartment. I dont have the stuff to do them with the car off. Are you open tomorrow, and if so what time?

Thanks for the offer, I'll take you up on it sometime. Thanks.

-Dustin-