I installed an engine in my Stepson's 1994 Formula over the weekend. It's a stock shortblock with a CC304 cam, ported/milled heads and roller rockers. It runs really strong, but I noticed that there is a black wire with a white stripe on the wiring harness that has no connector on it and I'm not sure where to connect it. It is on the pass side near the knock sensor. I noticed it when I connected the knock sensor. Where does this wire go? Any help would be greatly appreciated.
Kevin

 

I'm not 100% positive on this, but I'm pretty sure that a black wire with a white stripe is part of the grounding network.

 

toph,
Thanks for the info. I thought that this might be the case, but wasn't positive either. Anybody else got any thoughts?
Kevin

 

It is a ground like Toph said. It should be the wire on the stud in the middle of this pic. It provides a ground to the pcm, oil level sensor, MAF, theft deterrent module, fuel pump relay and a few other things.

 

Shoebox,
Thanks for your help! I'll ground that wire this evening.
Take Care,
Kevin