Will shortie headers help?
Thread Starter
Registered User
Joined: May 2000
Posts: 210
From: Salisbury, NC, USA
Will shortie headers help?
I am about to put these things on, I hope they will help.
http://community.webshots.com/album/69177987lDTNXx
I dont know what brand they are, but they are a dual cat setup, but not like most. The cats are side by side under the hump in the floor. I am also going from factory 2 3/4" to 3" intermediate pipe with another flowmaster (40 series?).
With mods listed about how much do you think I will gain?
Thanks
http://community.webshots.com/album/69177987lDTNXx
I dont know what brand they are, but they are a dual cat setup, but not like most. The cats are side by side under the hump in the floor. I am also going from factory 2 3/4" to 3" intermediate pipe with another flowmaster (40 series?).
With mods listed about how much do you think I will gain?
Thanks
Thread Starter
Registered User
Joined: May 2000
Posts: 210
From: Salisbury, NC, USA
Originally posted by HardcoreRM125
I'd expect 15ish RWHP , 18ish FWHP switchin to a full daul-Cat true daul exhaust
I'd expect 15ish RWHP , 18ish FWHP switchin to a full daul-Cat true daul exhaust
It is dual cat, single exhaust
Registered User
Joined: Aug 2000
Posts: 218
From: Connecticut
FWHP=FlyWheel HorsePower
They look like RK Sport or Arizona Speed and Marine headers if you have a dual cat y-pipe it proably the Random Tech setup.It should help you alot I would say 25 plus with the blower. Just make sure you do not have any exhaust leaks or the car will run like crap.It can go lean very easy that way(ask me how I know)
They look like RK Sport or Arizona Speed and Marine headers if you have a dual cat y-pipe it proably the Random Tech setup.It should help you alot I would say 25 plus with the blower. Just make sure you do not have any exhaust leaks or the car will run like crap.It can go lean very easy that way(ask me how I know)
Last edited by Another Red Z; May 26, 2003 at 04:10 PM.
Thread Starter
Registered User
Joined: May 2000
Posts: 210
From: Salisbury, NC, USA
Originally posted by Another Red Z
FWHP=FlyWheel HorsePower
They look like RK Sport or Arizona Speed and Marine headers if you have a dual cat y-pipe it proably the Random Tech setup.It should help you alot I would say 25 plus with the blower. Just make sure you do not have any exhaust leaks or the car will run like crap.It can go lean very easy that way(ask me how I know)
FWHP=FlyWheel HorsePower
They look like RK Sport or Arizona Speed and Marine headers if you have a dual cat y-pipe it proably the Random Tech setup.It should help you alot I would say 25 plus with the blower. Just make sure you do not have any exhaust leaks or the car will run like crap.It can go lean very easy that way(ask me how I know)
Registered User
Joined: Aug 2000
Posts: 218
From: Connecticut
Because I put SLP shorties on my car and had leaks.I could watch the BLM's go to 160 on the side with leak.After I took them off a hand filled the flange flat the BLM's drop to normal between 126-130.
Thread
Thread Starter
Forum
Replies
Last Post
colts0455
LT1 Based Engine Tech
7
Jul 28, 2015 11:28 PM
