whoever said the hotcam had no lope?
Thread Starter
Registered User
Joined: Mar 2005
Posts: 1,076
From: Memphis, TN
Registered User
Joined: Nov 2003
Posts: 353
From: Tulsa Oklahoma
Re: whoever said the hotcam had no lope?
Originally Posted by 69gto96z
Sounds awesome, I have been wanting to hear a clip of a Hot Cam on an LT1, and I couldn't find one on LS1sounds.com.
To the thread starter was that running with a cut out? Sounds very good.
Thread Starter
Registered User
Joined: Mar 2005
Posts: 1,076
From: Memphis, TN
Re: whoever said the hotcam had no lope?
Originally Posted by Red on Red WS6
When I had shortys and full exhaust the cam didn't sound far from stock. It sounds much better now here is a clip at idle also. Idle vid
To the thread starter was that running with a cut out? Sounds very good.
To the thread starter was that running with a cut out? Sounds very good.
no thats going through my Flowmaster American thunder catback that everyone here hates... but I love!
Registered User
Joined: Jun 2002
Posts: 109
From: West Plains, MO
Re: whoever said the hotcam had no lope?
ahh that does sound really good! I can't wait to get my truck finished!
I just got my 1995 LT1 stroker running for the very first time about an hour ago. I dry fired it once I got all the electroincs finished. open headers it sounds great idleing, but only heard it for about 15 seconds. I got to finish the cooling system tomorrow and accessories. I put it in my 1967 chevy pickup with stock computer and harness.
here's what I got
1995 LT1 Block .020 overbore
SRP 16cc dish pistons
6" eagle SIR rods
3.75" eagle cast crank, internal balance, pro products damper.
stock 1995 casting heads with a decent amount of porting done.
LT4 hot cam, harland sharp 1.6 rockers, guide plates, LT4 hot cam springs
I've got this infront of a TH400 with a 10" 3300 converter, 3.73 posi with 295/50 R15's, 3950lbs with me in it! i'm hopeing for low 13's out of the old truck.
my bone stock 2001 Vortec 6.0L did 13.97 1/4, this lt1 should do a lot better..maybe even 12's with some tires I hope!
I just got my 1995 LT1 stroker running for the very first time about an hour ago. I dry fired it once I got all the electroincs finished. open headers it sounds great idleing, but only heard it for about 15 seconds. I got to finish the cooling system tomorrow and accessories. I put it in my 1967 chevy pickup with stock computer and harness.
here's what I got
1995 LT1 Block .020 overbore
SRP 16cc dish pistons
6" eagle SIR rods
3.75" eagle cast crank, internal balance, pro products damper.
stock 1995 casting heads with a decent amount of porting done.
LT4 hot cam, harland sharp 1.6 rockers, guide plates, LT4 hot cam springs
I've got this infront of a TH400 with a 10" 3300 converter, 3.73 posi with 295/50 R15's, 3950lbs with me in it! i'm hopeing for low 13's out of the old truck.
my bone stock 2001 Vortec 6.0L did 13.97 1/4, this lt1 should do a lot better..maybe even 12's with some tires I hope!
Thread
Thread Starter
Forum
Replies
Last Post