hey i was just wondering where i am going to be hp/tq wise with my mods... heres what i'm going to have:

-BBK Underdrive pulleys
-Hooker Catback 3"
-Lingenfelter CAI w/ K&N
-58mm throttle body
-PaceSetter Longtubes (coated)
-PaceSetter y-pipe
-no cats
-QTP Cutout
-Comp Cams XFI LT1 Camshaft, 218 / 224, .570 / .565 113 LSA
-Comp Cams One-Piece Chromemoly pushrods, 7.200"
-Manley Performance Valve Springs, LS1/LT1/LT4/L98, 1.290 diameter, Double spring w/o damper, max lift .650"
-MADZ28 tune
-Aluminum Flywheel

Just wondering about where i'll be... tks...

 

without ported heads, i'd say 350-375hp.

 

Why did you buy a spring for less lift than the cam you have listed?

 

good point... i havnt yet... lol...

 

Ask around and see if the Comp 918 beehives will work with that cam. ( I think they will ) A little pricey but well worth the money.

 

somewhere around 350 rwhp. tq-don't know. I have similar power mods plus ported heads. I have a lighter driveshaft. You have lighter flywheel. I dyno at 375 rwhp.

 

you are going to need the beehives to control that cam. I believe that the profile it is on beats up springs pretty good.