What size cutout do I need to buy for my stock exhaust (2.5"?)and are these any good? Thanks.

http://www.jegs.com/cgi-bin/ncommerc...62&prmenbr=361

 

I believe 2 3/4"...

 

I don't know what size the stock 95 exhaust is, but my stock 97 intermediate pipe is 2.75". I used the 3" and it fit perfectly. By the way, anyone need a 3" electric cut-out? When I bought mine from Quick time performance, they sent me two. So I have an extra brand new electric cutout and cable, all you need is the switch, and a 35.00 cutout pipe. The kit retails for 200.00 shipped......

 

My friend has a cutout on his 95 z28 his is a 3in he's also a member (chevyboyz28)

 

you selling it or giving it away, i have a cutout already installed on my car, but dont really like the hassle of crawling under everytime i wanna cap/open it, you should just let me have it, i would do the same for you !

 

I would give it away, but it looks on my credit card like they charged me for two.......not really sure why.

 

so 3" will weld right up is what yall are saying? Can someone confirmt his so I can order it today. Thanks guys, this will be the first thing I personally do to add power(original owner did everything in sig) but it sure woulnt be the last. Im pretty damn excited!

 

You want a 3 inch cutout.. I repeat 3 inch

Jegs and summit both have them for around $30

You will LOVE it ! ! !

 

YES THIS IS A CONFIRMATION ON THE CUTOUT 3IN WILL WELD RIGHT UP WITH NO PROBLEM. mY FRIEND HAS THE SAME CUTOUT ON HIS Z28. HIS IS A 95, SO GET YOUR VISA OUT AND CALLLLL SUMMITT

 

How much you askin for it?

 

I will buy it for $150 + shipping since I don't really need an electronic one. E-mail me.

 

What cut-out diameter would be best for a 3" intermediate pipe?

 

Sorry, the extra one I had just sold on ebay. You could use a 3" cutout on a 3" i-pipe if you butt weld it instead of overlapping them. It would be a little harder to get good solid welds all the way around though......I think they make 3 1/4", that would be your best bet.....

 

Ok, I want to get the Electric cutout but I just wanted to make sure I understood what was Jegs, Summit etc..was showing on their websites as far as the elec cutout.

So, is the electric unit sold by itself? Or does it come with the Flange?

If the flange doesnt come with...... 3" flange to 3" electric cutout right..? I would assume so...Since Ive never seen this part....I cant really picture in my head how the unit fits on the flange as far as the open/close fins opening up. The fins open up the same as our intake right? The pictures Ive seen are too small to determine.

If any of you have pics..I would love to see....Thanks
scooby_smokes_doobies@yahoo.com


Thanks Guys.....!

 

Check their site to see for your self.

http://www.quicktimeperformance.com/qtec.htm