what should i do next

can u do a cc306 with lt4 springs and all or not
or just go with the lt4 cam or the cc305

 

I don't think you can run LT4 springs with a CC306. I think the LT4 springs are only good for a MAX of .550 lift.

Mike

 

Once you do the cam. you are going to need a good tune. madz28 would be my first choice.

 

Get the 306 or the 847.....

 

If you don't have emissions I say go big. If you do like us in good ol cali do I like the LT4 hotcam.

 

LT4 springs would be pushing it on a CC306. The LT4 springs are rated to .525" lift which is right on the verge for a hot cam with 1.6 rockers.

 

what kinda hp will i see with the cc306 and a dyno tune with p&p heads

 

What are elderbroke headers? Are they Canadian?

 

sorry i cant spell good

 

you'll see over 400 rwhp easy with gm847 with heads and a tune...

you will need springs...hotcam springs are junk.... total crap!!!!

k motion 800 or comp 987's with 1.5 NSA rocker!!!

 

what about the cc306 how street able is the gm847

 

Speaking of the tune... I always heard lots of good things about pcmforless tuning. This is who i was going to go with for my tuning after my buildup. Is there anyone who knows more about madz's tuning that thinks its better.

 

Those are headers made for poor bastages.

Between Brian and Ion, I don't think either is any better than the other. They are both great guys and seem to do good work. I think Brian takes less vacations though.

 

well what hp will i see with a cc306 with 1/6 rockers or gm847 what will i see. and whitch one is more streetable. what rwhp can i apect and also which is good for a 383 all motor

 

Alright, let me help you.

grennile = Granatelli

elder broke = Edelbrock