What members on here do head porting for a good price?
Registered User
Joined: Jul 2001
Posts: 718
From: Wichita Falls,Texas
Lloyd Elliott
I had a set ported by him with 2.02/1.6 valves flowed 287/201 @ .600. Put down 413RWHP and 391 RWTQ with a 72k stock bottom end (cc306 Lt's) Paid about $1000 for porting, new valves, decking, valve job, new valve seals and shipping to and back to me. HTH
Joe
I had a set ported by him with 2.02/1.6 valves flowed 287/201 @ .600. Put down 413RWHP and 391 RWTQ with a 72k stock bottom end (cc306 Lt's) Paid about $1000 for porting, new valves, decking, valve job, new valve seals and shipping to and back to me. HTH
Joe
Registered User
Joined: Apr 2000
Posts: 1,070
From: Austin, TX or Texas State University at San Marcos
Smoke T/A. I thought you port and polished heads??!! I am also looking for somebody to port and polish my heads. Looking for somebody in my area to do it. Any people in mind???
Chris
Chris
Registered User
Joined: Jul 2001
Posts: 718
From: Wichita Falls,Texas
Originally posted by 95z28 -quicksilver
Smoke T/A. I thought you port and polished heads??!! I am also looking for somebody to port and polish my heads. Looking for somebody in my area to do it. Any people in mind???
Chris
Smoke T/A. I thought you port and polished heads??!! I am also looking for somebody to port and polish my heads. Looking for somebody in my area to do it. Any people in mind???
Chris
SmokeT/A...Was that on an LT1 im guessing, I checked out your sig and site and its a 98. Did you have an LT1 or something?
Registered User
Joined: Feb 2001
Posts: 501
From: Del Valle, Tx, U.S.A
Hey Joe, I finally got everything working. The knocking turned out to be the tranny mount bolts. It runs REAL nice. I had my heads touched up by Joe(SMOKE/TA) when he installed my HC kit. I will be taking it to the Dyno (finally) in about 2 weeks. For the $$$ and what I wanted, couldn't beat the price or effort.
Kyle
Kyle
Registered User
Joined: Jul 2001
Posts: 718
From: Wichita Falls,Texas
Originally posted by vodoo-chile
Hey Joe, I finally got everything working. The knocking turned out to be the tranny mount bolts. It runs REAL nice. I had my heads touched up by Joe(SMOKE/TA) when he installed my HC kit. I will be taking it to the Dyno (finally) in about 2 weeks. For the $$$ and what I wanted, couldn't beat the price or effort.
Kyle
Hey Joe, I finally got everything working. The knocking turned out to be the tranny mount bolts. It runs REAL nice. I had my heads touched up by Joe(SMOKE/TA) when he installed my HC kit. I will be taking it to the Dyno (finally) in about 2 weeks. For the $$$ and what I wanted, couldn't beat the price or effort.
Kyle
Cool glad you finally got it all worked out
Did you ever reset the IAC so it would not die when coming to a stop or going from P to R? LMK what it puts down.Later
Joe
Registered User
Joined: Feb 2001
Posts: 501
From: Del Valle, Tx, U.S.A
No, I have not doen anything with IAC yet. Its still stumbles when coming to a start or shifting gears but I had Bryan up the idle to keep it from dying right now. How can you reset the IAC? I thought you just cleaned or bought a new one. I'll let you know the #'s though.
Kyle
Kyle
Thread Starter
Registered User
Joined: Jul 2000
Posts: 959
From: Green Bay, WI
Joe or Phil, would either of you two be willing to do a very basic quick cleanup on the heads? I dont have a lot of money but I have to pull the heads for a gasket leak anyhow, so I can afford a little bit more $$ to put something better back on. Let me know prices and timeframe if you can. Thanks to all.
Aaron
Aaron
Registered User
Joined: Jul 2001
Posts: 718
From: Wichita Falls,Texas
Originally posted by 94 CAMRO Z28
Joe or Phil, would either of you two be willing to do a very basic quick cleanup on the heads? I dont have a lot of money but I have to pull the heads for a gasket leak anyhow, so I can afford a little bit more $$ to put something better back on. Let me know prices and timeframe if you can. Thanks to all.
Aaron
Joe or Phil, would either of you two be willing to do a very basic quick cleanup on the heads? I dont have a lot of money but I have to pull the heads for a gasket leak anyhow, so I can afford a little bit more $$ to put something better back on. Let me know prices and timeframe if you can. Thanks to all.
Aaron
Hey man I sent you an email LMK.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM