What Bolt-ons am I missing?
Thread Starter
Registered User
Joined: May 2002
Posts: 204
From: Canada
What Bolt-ons am I missing?
You can see my current mods in my signature! I was wondering if I have missed any 'easy' bolt-ons or other mods that should be done? Either engine, clutch, tranny, rear-end, suspension, etc. If you could list the mod and why it would benefit me (+hp or <et), that would be great!!!!
Thanks for you help!!!
Thanks for you help!!!
Registered User
Joined: Aug 2000
Posts: 783
From: Atlanta, GA
Switching to longtube headers would give you some HP especially b/c of your head work and cam.
SUspension wise I think it would be wise to invest in some LCAs, SFCs, and relocation backets. Then also some slicks.
Next would be some weight reduction
SUspension wise I think it would be wise to invest in some LCAs, SFCs, and relocation backets. Then also some slicks.
Next would be some weight reduction
Registered User
Joined: Oct 2000
Posts: 1,997
From: Reading, PA
SFC's - no hp but will really stiffen the car up, bolt on or weld
UD pulley - shown to gain 5rwtq & 1rwhp
TB bypass - free, and around 5rwhp
LS1 Driveshaft - reduce vibration if you still have stock steel, possible hp gain
Just a few ideas
UD pulley - shown to gain 5rwtq & 1rwhp
TB bypass - free, and around 5rwhp
LS1 Driveshaft - reduce vibration if you still have stock steel, possible hp gain
Just a few ideas
Registered User
Joined: Sep 1998
Posts: 8,319
From: US 1 Mile Marker 52 in the Florida Keys
since you have a cam/heads you could probably gain 5-10 hp from getting 52mm throttle body, either have your stocker bored by someone like NOMAD or buy an aftermarket unit.
how bout upgrading to 1.6 rockers?
bigger injectors?
how bout upgrading to 1.6 rockers?
bigger injectors?
Administrator
Joined: Mar 1999
Posts: 3,664
From: Brunswick, Maine 04011
I would go for one of these: http://www.wolferacecraft.com/pages/...rt/weld-in.htm
Because it will stiffen the car up and make it safer at the same time without having to add suspension components. If you race frequently I can see a 12 bolt in your future too.
Because it will stiffen the car up and make it safer at the same time without having to add suspension components. If you race frequently I can see a 12 bolt in your future too.
Registered User
Joined: Jul 2001
Posts: 660
From: Cary, IL
What kinda gear ratio you got in there??? You can easily find a whole rearaxel on the board for about 250-300. A lot easier and cheaper to do than a gear install. Might wanna think about that. Definitely go with some LCA's too. They help out a lot.
Thread Starter
Registered User
Joined: May 2002
Posts: 204
From: Canada
I've currently got 3:42 gears. I have been thinking about getting some 3:73. I really have to slip the clutch with 3:42 to get a decent launch.
I think I'll also go with the LCA and Relocation Brackets as well!!
I think I'll also go with the LCA and Relocation Brackets as well!!
Thread
Thread Starter
Forum
Replies
Last Post
