I am trying to get a list together for my cam swap. Im going with the xe 224/230 on a 112 lsa. I heard that combination motorsports has a cam package but I couldnt find it on their website.

Comp Cams Xtreme 224/230 112 lsa
Comp Cams Magnum 1.6 ratio roller tip rockers
Comp Cams dual valvesprings 986-16
Comp Cams spring seats 4770-16
Comp Cams retainers 740-16
Comp Cams 10' Superlocks 611-16


OK, thats what I have so far, anything wrong with those things and also am I missing anything??? Any help is appreciated I want to do this right

 

Since you are putting so much time and money into the car already, I'd go ahead and replace the lifters. It's not mandatory though.

 

ok, thanks. Any other opinions? Anyone know about the CM package???

 

Other then lifters, can anyone think of anything?

 

get full roller rockers, not roller tipped rockers...
and sometimes you may need to change your pushrods too, dont know what length depends on the cam i think also.

 

i too would suggest a full roller rocker(1.6)

u can go with the LT4 RR's for cheap or the crane gold race rockers for expensive.

if u want to replace pushrods, u can but dont have to with that cam. crane makes a good hardened pushrods for under $50